- Amateur Radio (Ham Radio) Community

Call Search

New to Ham Radio?
My Profile

Friends Remembered
Survey Question

DX Cluster Spots

Ham Exams
Ham Links
List Archives
News Articles
Product Reviews
QSL Managers

Site Info
eHam Help (FAQ)
Support the site
The eHam Team
Advertising Info
Vision Statement

Categories | Transceivers: HF Amateur HF+6M+VHF+UHF models - not QRP <5W | ICOM IC-7610 Help

Show all reviews of the ICOM IC-7610

You can write your own review of the ICOM IC-7610 .

VK4VW  Rating: 5/5 Nov 13, 2017 22:23  Send this review to a friend!
Excellent transceiver  Time owned: 0 to 3 months
Just put the 7610 in the shack 3 days ago but the improvement over the 7600 and my Kenwood TS-990 I previously had was immediately evident.

Improved signal to noise ratio, recovered audio is far superior and into an external speaker it is magnificent.

I have a lot of noise here at my QTH like most suburban hams and the 50kw solid state broadcast transmitter down the road just adds an other dimension to this challenge. Therefore I was a little concerned that the receiver would struggle, my concerns were unfounded. The 7610 receiver is so much better than the IC-9100 and IC-7300 currently in the shack and a real improvement over the IC-7600 and the Kenwood TS-990 I had until recently.

The screen is very sharp and bright and the resolution is better than I expected. Drives my Expert 1.3K-FA very smoothly, no spikes or overshoot at all.

All the knobs are in the right place and I find using the sub received very easy.

A keeper I am sure.

Thank you for reading.
Product is in production.
Email Subscription
You are not subscribed to this review.

My Subscriptions
Subscriptions Help

If you have any questions, problems, or suggestions about Reviews please email your Reviews Manager