eHam.net - Amateur Radio (Ham Radio) Community

Call Search
     

New to Ham Radio?
My Profile

Community
Articles
Forums
News
Reviews
Friends Remembered
Strays
Survey Question

Operating
Contesting
DX Cluster Spots
Propagation

Resources
Calendar
Classifieds
Ham Exams
Ham Links
List Archives
News Articles
Product Reviews
QSL Managers

Site Info
eHam Help (FAQ)
Support the site
The eHam Team
Advertising Info
Vision Statement
About eHam.net


QSL Managers
     

Ham Links
     


Categories | SWR & Wattmeters & Dummy Loads | Palstar DL5K Help

Show all reviews of the Palstar DL5K

You can write your own review of the Palstar DL5K.

KA1XO  Rating: 5/5 Apr 13, 2004 21:22  Send this review to a friend!
WORTHWHILE  Time owned: 0 to 3 months
All the complaints I read about the Palstar DL2K were addressed in the making of the DL5K.

The buttons are on the front and the SO-239 is on the back.

The manufacturer pays attention to detail. There are nylon cushion washers under the cabinet screws. The cabinet screws are 6-32 machine screws and not self-tappers.

The fans cooling the resistor bodies have grids on both sides of the fans, and not just the cabinet grills. Entirely a quality move and much appreciated.

The wattmeter is selectable at 500 or 5KW and it compares with a Coaxial Dynamics so the calibration is correct. The meter light can be turned off if the meter isn't being looked at for tune-up purposes. The power connector is a four-pin microphone, threaded collar assembly instead of a cheapo barrel plug. The unit works. I can now tune up my linear amplifier and tweak it at full power (where linears need to be tuned up to) and not have to worry about smoking oil from my cantenna. The fans come on when the resistors warm up and turn off when they cool down.

The meter box is completely shielded with a grommet to protect the wires going in it.

Where have these people been all my life? Finally some real quality! If you own a linear amplifier and need a reasonable dummy load so you can tune up properly the DL5K is worth every penny. It's not too shabby looking either, as the finish is uniform and strong. 
Product is in production.
Email Subscription
You are not subscribed to this review.

Subscribe!
My Subscriptions
Subscriptions Help


If you have any questions, problems, or suggestions about Reviews please email your Reviews Manager