- Amateur Radio (Ham Radio) Community

Call Search

New to Ham Radio?
My Profile

Friends Remembered
Survey Question

DX Cluster Spots

Ham Exams
Ham Links
List Archives
News Articles
Product Reviews
QSL Managers

Site Info
eHam Help (FAQ)
Support the site
The eHam Team
Advertising Info
Vision Statement

Categories | QRP Accessories | Rework Eliminator™ K2 Internal Mic Adaptor Help

Show all reviews of the Rework Eliminator™ K2 Internal Mic Adaptor

You can write your own review of the Rework Eliminator™ K2 Internal Mic Adaptor.

WA6VNN  Rating: 5/5 Sep 9, 2007 20:01  Send this review to a friend!
Rework Eliminator's K2 Internal Mic Adaptor  Time owned: 0 to 3 months
I just finished assembling and installing the K2IMA produced by Rework Eliminator ( on my K2/100 (sn 4887) and I'm thoroughly delighted with the results. I assembled the parts using a small vice and my trusty old Weller MP-107 soldering iron. After assembling the module it took about 15 minutes to attach it to the existing mic header connectors on the K2 Control Board. Within less than 20 minutes I was able to reassemble the K2/100 and test configurations for over half a dozen mics, every one working the first time. I hold this due to the excellent documentation for mic coinfiguration that is included with the IMA. Mics tested included some old and some new: Elecraft/Heil Proset-K2, Icom HM-12 and HM-14, Yaesu MH-1B, and an old Alinco EMS-10 (same wiring as EMS-5A.) It takes less than a 2 minutes to pop the side cover off, configure the jumpers, replace the cover and swap the mics. 73 - Al WA6VNN  
Product is in production.
Email Subscription
You are not subscribed to this review.

My Subscriptions
Subscriptions Help

If you have any questions, problems, or suggestions about Reviews please email your Reviews Manager