eHam.net - Amateur Radio (Ham Radio) Community

Call Search
     

New to Ham Radio?
My Profile

Community
Articles
Forums
News
Reviews
Friends Remembered
Strays
Survey Question

Operating
Contesting
DX Cluster Spots
Propagation

Resources
Calendar
Classifieds
Ham Exams
Ham Links
List Archives
News Articles
Product Reviews
QSL Managers

Site Info
eHam Help (FAQ)
Support the site
The eHam Team
Advertising Info
Vision Statement
About eHam.net


Categories | Microphones | Yaesu MH31 Help

Show all reviews of the Yaesu MH31

You can write your own review of the Yaesu MH31.

G8JNJ  Rating: 2/5 Sep 14, 2007 04:14  Send this review to a friend!
Muffled audio  Time owned: 3 to 6 months
This microphone was supplied with my FT-897D.

Unfortunately the frequency response is not suited to my voice, which seems to have a peak at around 800Hz.

Position 2 gives the best results, with the low frequencies being reduced; however the speech quality still sounds muffled.

I did some investigation with ‘Spectrum lab’ running on my PC. I believe there is a fundamental problem with the design of the slotted vents on the face of the microphone. This seems to cause standing wave patterns, which put ‘notches’ in the frequency response. You may notice this if you compare the variation in speech quality when you speak directly into the front of the microphone, from the sides, or from above or below. Each position gives a different tonal quality.

I tried a few different microphone inserts before realising this problem. So I now use a different hand mic or boom headset with electret capsules, which give me much better audio reports.
 
Product is in production.
Email Subscription
You are not subscribed to this review.

Subscribe!
My Subscriptions
Subscriptions Help


If you have any questions, problems, or suggestions about Reviews please email your Reviews Manager