eHam.net - Amateur Radio (Ham Radio) Community

Call Search
     

New to Ham Radio?
My Profile

Community
Articles
Forums
News
Reviews
Friends Remembered
Strays
Survey Question

Operating
Contesting
DX Cluster Spots
Propagation

Resources
Calendar
Classifieds
Ham Exams
Ham Links
List Archives
News Articles
Product Reviews
QSL Managers

Site Info
eHam Help (FAQ)
Support the site
The eHam Team
Advertising Info
Vision Statement
About eHam.net


Categories | Power Supplies | Amperor APP 300 25 Amp DC power supply Help

Show all reviews of the Amperor APP 300 25 Amp DC power supply

You can write your own review of the Amperor APP 300 25 Amp DC power supply.

G8JNJ  Rating: 4/5 Apr 26, 2010 08:00  Send this review to a friend!
Works fine for the price - RF noise can be reduced  Time owned: 6 to 12 months
I have one of these which I use with an HF transceiver.

There is a small amount of radiated RF noise which can be considerably reduced with a quick modification.

Drill a small hole near the DC 0v terminal. Fit a nut, bolt, star washer and solder tag and connect a short wire between the tag and 0V terminal.

Connect a 0.1uF capacitor (ideally ceramic) with as short a set of leads as possible across the DC output terminals. Another 0.1uF between the +ve and chassis connection may also help slightly.

Wind the DC output cable a few times through a suitable size ferrite ring. I'd also do this with the mains supply cable. In both cases, wind the cable as close to the supply as possible.

These modifications reduce the radiated emissions by at least 10dB.

Martin - G8JNJ

www.g8jnj.webs.com
 
Product is in production.
Email Subscription
You are not subscribed to this review.

Subscribe!
My Subscriptions
Subscriptions Help


If you have any questions, problems, or suggestions about Reviews please email your Reviews Manager