Manager


Manager - NA6M
Manager Notes

Classified: MFJ 202B Noise Bridge Sold

Date Posted By Category User IP Address
2022-09-12Login requiredTest EquipmentLogin required
SOLD!The R-X Noise Bridge tells you if you antenna is resonant or not, and if not, indicates whether it is too long or too short. It works with dipoles, inverted Vees, quads, Yagi beams, multiband trap dipoles and verticals. It works better than a dip oscillator because the frequency of measurement is set your receiver which is calibrated more accurately than a dip oscillator and is more stable. It is easy to use. Just connect to the antenna feed points (at the center of your dipole or base of your vertical). Then connect to your receiver with a coax line. Tune the receiver to the frequency at which you want to measure the antenna and turn on the noise bridge. You will hear a loud noise in the receiver. Now adjust the two knobs on the noise bridge for a null (noise minimum). Now read the knobs. The "R" knob reads the antenna feedpoint resistance directly in ohms. The "X" knob reads reactance. This device can be used to set your antenna tuner, test a balun, check tuned circuits and more!
Operates from 9 volt battery (not supplied).
Reminder: Do not accidently transmit into this device.
Do not turn on transmitter or let VOX turn it on when
Works nice. Sold as is due to age...
$25.00 shipped in conus. US Postal Money Order please. No Paypal.