Manager


Manager - NA6M
Manager Notes

Classifieds Home

Showing 181-200 of 5,785 items.

WTB: Rohn 25G tower sections

Date Posted By Category User IP
2021-05-26********Towers & Access********
WTB: Rohn 25G tower sections in good condition on ground located within approx. 150 miles Del Rio TX. Willing to travel San Antonio or San Angelo to pick up. Pse contact me via email; yvadir at gmail.com

FS: Tri-ex WT-51 crank up tower. 52' in NJ

Date Posted By Category User IP
2021-05-19********Towers & Access********
52 ft crank-up tower with coax arms, thrust bearing, steel mounting plate. 2" mast not included. $750 cash.

This tower sells for $4,063.00 plus about same $$ for shipping.

Top section has bend that causes it to rub when lowered. Still collapses all the way down. Can buy new top section from Tasjian, repair or remove it and use bottom and middle as 36 ft with just one pulley and cable.

Tower was just lowered this week.
Pick up in Morris county NJ.
Have lots of pictures.

$750

GENUINE ROHN BPH25 TILT BASE 4 ROHN 25 TOWERS

Date Posted By Category User IP
2021-05-19********Towers & Access********
FOR SALE: GENUINE ROHN BPH25 TILT BASE 4 ROHN 25 TOWERS GOOD CONDITION $200.00 SHIPPED/INSURED TO U I will accept "PAYPAL", Postal money order, Cash Please call Bruce WL7B In CT.1-860-582-8322 Before 9:00PM EST
OR EMAIL ME AT: WL7BRUCE at YAHOO.COM
Please search with my call WL7B to see other items I have for sale

Force 12 LPT-827 motorized aluminum crank-up tower

Date Posted By Category User IP
2021-05-17********Towers & Access********
Lightweight Force 12 tower made from telescoping square aluminum tubes extends from about 8 ft to about 27 ft. Comes with StrongArm 120VAC electric winch.

Powder-coated dark green for stealth.

Will handle small tribander or similar. Two people can easily carry this mighty mite.

Works great and condition is VG. Has always been installed in the dry western Colorado air. I am the original owner.

Priced to sell @ $360, you pick up near Grand Junction CO. Cash app, Venmo, and PayPal accepted.

Cash app, Venmo, and PayPal accepted.

Email Bill AA7XT (ex-AA4XT, NT1Y, AA6TT) via link above.

Want 1200 lbs phillystran

Date Posted By Category User IP
2021-05-17********Towers & Access********
seek few hundred feet of 1200 lb phillystran

what do you have?

FS: ROOF TOWER 6 FT

Date Posted By Category User IP
2021-05-15********Towers & Access********
6' ROOF TOWER
VERY NICE SHAPE
$200.00 PICKED UP IN SW CONNECTICUT

WILL SHIP AT YOUR COST

FS: ROOF TOWER 6 FT

Date Posted By Category User IP
2021-05-15********Towers & Access********
6' ROOF TOWER
GOOD SHAPE WITH THRUST BEARING

$200.00 PICKED UP IN SW CONNECTICUT

WILL SHIP AT YOUR COST

Four (4) Large Galvanized Turnbuckles

Date Posted By Category User IP
2021-05-08********Towers & Access********
I am offering for sale four (4) large (21") galvanized steel turnbuckles. They are stamped “5/8”, “DCH”, “L”, “K” and “Korea”. I do not know what all of those mean, but obviously the bolts are 5/8”, and are made in Korea. These are HEAVY (4 lb each). I will ship to USA addresses only. Make me an offer; maybe I can make it work!

Thanks for looking!!!
73,
Francis WA4ZYN

ROHN RP25G Rotor/ANTENNA POST

Date Posted By Category User IP
2021-05-06********Towers & Access********
SOLD!FOR SALE: ROHN RP25G Rotor/ANTENNA POST Assemblies $35.00 + THESE R USED TO INSTALL ANTENNA ANYWHERE OFF THE THREE TOWER LEGS I USED IT ON A 2/440 VERTICAL AT 50 FEET ON MY 60 FOOT TOWER CAN ALSO BE USED ON ROTOR TO MOUNT ROTATABLE ANTENNA AT A DIFFERENT HEIGHT ON TOWER ANTENNA VERY HANDY I will accept "PAYPAL", Postal money order, Cash Please call Bruce WL7B In CT.1-860-582-8322 Before 9:00PM EST
OR EMAIL ME AT: WL7BRUCE at YAHOO.COM
Please search with my call WL7B to see other items I have for sale

Rohn 65G Rotating Tower

Date Posted By Category User IP
2021-04-28********Towers & Access********
***Rohn 65G Rotating Tower***

* 150' Rohn 65G Rotating Tower
* 6-20' sections
* 3-10' sections
* 3 new K0XG guy rings
* Sabre AP3 Magnum rotator/controller
* Complete hardware component set
* Excellent condition
* All components are on the ground
* I can load on your trailer, help arrange shipping or deliver for a pre-arranged fee

***PRICE: $10,750.00 cash, no trades
501-773-2779

MA40 or MA550 Tower

Date Posted By Category User IP
2021-04-28********Towers & Access********
Looking to buy US Tower MA40 or MA550
In the Huntsville Alabama area preferred.

ROHN TB3 MAST BEARING

Date Posted By Category User IP
2021-04-26********Towers & Access********
SOLD!Hi, I have a NEW Rohn TB3 mast bearing that I want $150 including Priority shipping to ALL 50 STATES. PayPal is OK.

Sold and gone

Date Posted By Category User IP
2021-04-26********Towers & Access********
I just took delivery of this six weeks ago, I had plans that now have changed. Its NOT been used its NOT been outside, its just sat on the floor where you see it in the picture. I did hook a 10 foot piece of conductor to it to be sure it was calibrated and it was. The sale includes the following:
"Small" prop pitch rotor NEW NEVER USED
2 Inch Kurt Andress mast clamp with all hardware.
NEW Green Herron/Kurt RT21 controller specifically for the Prop pitch rotor
New special rotor plate and ALL hardware to mount the rotor to a Rohn 55g tower.
You have EVERYTHING you need to install this rotor system into your Rohn tower to carry EASILY an 80 meter three element beam or any other crazy array you like.

I have all the shipping boxes this came in.
Price is $5500.00 for all of it plus shipping. Cost $6000 new so you save 500 bucks.
Figure 150 bucks to ship more or less I would guess
but you will pay ONLY the exact shipping charges or arrange for a call tag if you wish.

Also I have 300 ft of 10AWG flexible conductor specifically for this rotor, $300 for that plus freight. Its still on the original spool so easy to ship that one too.

Call me if you have any questions.
three three six eight one six one zero two four

I am good on QRZ.com
Peter
W2PP

LM 470 tower

Date Posted By Category User IP
2021-04-24********Towers & Access********
70 ft crankup tower New cables 4/23/21, 12 base bolts4 coax arms, thrust bearing, hand wench , plate for motorized lift, no motor. lift fixture no motor. Also mosley 96 3, 6 band ,10 thru 40M ,5000 watts SSB 2000 CW, 36ft boom 3inch Dia. , longest element 27 ft 9 elements.
Tower $3000 Mosley $1800 in driveway SW Florida

WTB: Gin Pole

Date Posted By Category User IP
2021-04-21********Towers & Access********
Want to buy a Gin Pole that will work on Rohn 25 and 45 towers . Brand not important as long as it will work on those towers. Condition not important as long as it works. The clamp part is the most important part.
I am willing to drive up to 300 miles from Oshkosh, WI to pick up. Thanks, -Wayne W1QC

HEAVY DUTY Eye & Eye Galvanized Turnbuckles

Date Posted By Category User IP
2021-04-20********Towers & Access********
SOLD! FOR SALE: HEAVY DUTY Eye & Eye Galvanized Turnbuckle SEE PICTURE FOR DIMENSIONS HAVE 6 PIECES CAME OFF MY 60 FOOT TOWER WHICH I RECENTLY SOLD $120 FOR ALL 6 SHIPPED TO U.
I BELIEVE THESE R THE SPECS:
Working Load Limit:
1,200 lbs.
Assembly Break Strength:
6,000 lbs.
Finish:
Galvanized
Body Length:
6"
Diameter:
3/8"
Length Open:
18.24"
Length Closed:
12.24"
Turnbuckle Size:
3/8
HAVE GUY WIRES IF INTERESTED WILL THROW IN FOR FREE IF PICKED UP. LOCATED IN CENTRAL CT. 06010 ZIP RIGHT OFF OF ROUTE 84/72 I will accept "PAYPAL", Postal money order, Cash Please call Bruce WL7B In CT.1-860-582-8322 Before 9:00PM EST
OR EMAIL ME AT: WL7BRUCE at YAHOO.COM
Please search with my call WL7B to see other items I have for sale

FS: Guy wire set for 120 ft tower

Date Posted By Category User IP
2021-04-18********Towers & Access********
Complete set of guy wires for a 120 ft tower, 5/16 EHS, broken up every 12-14 feet with 502 insulators. There are 78 502 strain insulators, 174 BG2146 preforms and 18 3/8 THH guy thimbles. The lengths of the 3-level guy wire set are approximately 100 ft, 120 ft and 150 ft. They have been stored indoors since removal and are in very good condition. Asking $750 picked up in Vernon, CT.

Rohn 48' foldover tower - SOLD

Date Posted By Category User IP
2021-04-18********Towers & Access********
Rohn 48' foldover tower with guys, rotator shelf, and all other parts including new fasteners and the winch. Tower is down and ready to go for pick up only in Maine. Asking $350.00.

New Hardline grounding kits

Date Posted By Category User IP
2021-04-17********Towers & Access********
Ground your tower and/or hardline. These are (NOS) new old stock, RFS ground kits for 1-5/8" hardline cable, but could be used for other sizes. RFS part # 15579774. Will work on Andrew 1 5/8" hardline. Replace the end clamp and use on any size hardline. Resize the strap and use for grounding your tower legs.Kit comes with:
(1)one fresh roll of 2-1/2" x 24" butyl tape (Rubber coax sealer)
(1) one #6 copper ground wire w/lug kit and stainless hardware
(1) one roll of 3/4" x 66' black electrical tape.
Five (5) complete kits for $65 shipped.
If you have any questions call 301-233-0910. Thanks, Dave N3EJT

WTB AN Wireless tower sections

Date Posted By Category User IP
2021-04-11********Towers & Access********
I have an AN Wireless LD60 tower, getting ready to install at new QTH. Thinking about making it a little taller. I currently have sections 7, 8, 9, 10, 11 and 12. Looking for sections 3, 4, 5 and 6. Or possibly trade this one for a similar 100' tower plus $.

More info: http://www.anwireless.com/

73 de KI5LET

Classifieds Statistics

Ads Posted last 30 days: 760
Ads Posted last week: 125
Ads Posted last 24 Hours: 3
Ads SOLD past week!: 19

Welcome Guest!

You are currently viewing all recent Ads.
Consider registering with eHam to give you more viewing options and a chance to send enquiries to AD posters.
If you have problems, questions or comments, please write the Classifieds Manager.