Manager


Manager - NA6M
Manager Notes

Classifieds Home

Showing 21-40 of 5,785 items.

GONE

Date Posted By Category User IP
2022-12-08********Towers & Access********
THIS IS A RE-POST

I had 4 parties who said they wanted these towers, all of them declined when I was able to finally offer access.

Just purchased a property in Murphy, TX (outside Dallas). Prior owner was a Ham professional... there are a couple of towers on property one that is about 60 foot tall - cabled, another that is roughly 25 foot tall. Both OWNED by the man who has since passed.

Looking for someone who can use this stuff, I hate to just tear it down and send it to the landfill.

If you wanna come and take it down, it's free to you.

Hit me via email. I'll respond promptly.

ROHN 25 ANTI CLIMB PANELSĀ 

Date Posted By Category User IP
2022-11-26********Towers & Access********
Ā 
Ā Ā 
PICK UP IN TAMPA
$125 for all 3

Tri Ex

Date Posted By Category User IP
2022-11-21********Towers & Access********
Tri Ex tower. In very good condition with NO rust. 70’ crank up. Motorized. I will include the Tailtwister rotator, standoffs and platform. It is located in my backyard so you will have to crane it over the house and onto your trailer. It is 20’ collapsed and has 4 sections for a total height of 70’. $5995! Tashjian gets WAY more for the same tower.

FREE TOWERS - GONE

Date Posted By Category User IP
2022-11-13********Towers & Access********
Just purchased a property in Murphy, TX (outside Dallas). Prior owner was a Ham professional... there are a couple of towers on property one that is about 60 foot tall - cabled another that is roughly 25 foot tall. Both OWNED by the man who has since passed.

Looking for someone who can use this stuff, I hate to just tear it down and send it to the landfill.

If you wanna come and take it down, it's free to you.

Hit me via email j~~~~~~~@y~~~~.com

DX Engineering Omni-Tilt for Hustler Verticals

Date Posted By Category User IP
2022-11-12********Towers & Access********
SOLD!As new DX Engineering Omni-Tilt 1P for Hustler BTV verticals. Included are two OTMC-250P SS Saddle Clamps needed for ground mounting on a buried 1-1/2" - 2.5" pipe.

$115 shipped Priority Mail - Pay-Pal or Postal MO

New Hardline/Tower grounding kits

Date Posted By Category User IP
2022-11-10********Towers & Access********
Ground your tower and/or hardline. These are (NOS) new old stock, RFS ground kits for 1-5/8" hardline cable, but could be used for other sizes. RFS part # 15579774. Will work on Andrew 1 5/8" hardline. Replace the end clamp and use on any size hardline. Resize the strap and use for grounding your tower legs.Kit comes with:
(1)one fresh roll of 2-1/2" x 24" butyl tape (Rubber coax sealer)
(1) one #6 copper ground wire w/lug kit and stainless hardware
(1) one roll of 3/4" x 66' black electrical tape.
Five (5) complete kits for $69 shipped.
If you have any questions call 301-233-0910. Thanks, Dave N3EJT

60' HD Universal Tower

Date Posted By Category User IP
2022-11-07********Towers & Access********
SOLD!Universal aluminum free standing Tower type HD21-60. New in 1997. Includes rotor plate & top thrust bearing. On the ground & ready for pick-up only. Near Indianapolis, In. $1700 (317) 852-7669 leave message.

Money & Finance

Date Posted By Category User IP
2022-10-28********Towers & Access********
I am a private lender Cash here local and international.

11'4" HD Aluminum Rooftop Tower

Date Posted By Category User IP
2022-10-27********Towers & Access********
Manufacturer is unknown, no markings on tower. Two pieces, a base unit 57" tall, 43" square at the base...tower section is 79" tall, 11.75" square. It is designed to be guyed, with 4 guy rings on the tower section. This has never been installed hence the following: (1) it will need feet (could just be angle aluminum or steel, hole to be drilled in each foot to allow mounting to tower base; (2) two plates, one for rotor mounting the other a top plate to mount a thrust bearing. If you can't do the work, I am sure that there is a metal working ham in your local club that would be glad to do these pieces for you. Just further proof this has never been installed. It has been stored outside, so aluminum has some oxidation. I can easily be transported in a pickup, if the opening on your SUV is over 43" high and wide it'll fit in your cargo space. Local pickup preferred, I can deliver anywhere within approximately 150 miles of my QTH for fuel and lunch cost. This is very heavy duty, entirely bolted together. You will need bolts to attach the tower section to the base section as can be seen in the photos. $350. Payment via cash, USPS MO, personal check (requires clearing before pickup)

US Tower Mast Raising Fixture (MRF)

Date Posted By Category User IP
2022-10-22********Towers & Access********

Never used US Tower Mast Raising Fixture (MRF). Cat in picture NOT included. HRO sells this for $620 + freight. $300 plus shipping, PayPal fee included. Pickup in St. Louis, MO strongly preferred. Lou, W0FK.


24 Foot Aluminum Mast

Date Posted By Category User IP
2022-10-12********Towers & Access********
SOLD!24 Foot Aluminum mast, 2" OD, 1/4" wall. Some rust discoloration where antennas had been mounted, but otherwise in good condition. $200, pickup in Medina, Ohio.

Rohn FK-25 48' Fold Over Tower -SOLD-.

Date Posted By Category User IP
2022-10-04********Towers & Access********
SOLD!I HAD a 48' high Rohn FK-25G Fold Over tower for sale. Me and my friends recently took it down - so it's on the ground ready for its next, new forever home.

Its basically two 25' Rohn 25G tower sections, joined in the middle with a Heavy Duty Hinge and a 15' long very heavy sturdy fulcrum lever connected to the top section(s) to move those sections up and down.

The very top of the top section has a 1-3/4" hole in it for a mast with a maximum OD diameter of 1-3/4".

I was able to bring this entire tower home in the back of my Sienna Mini van with only a few feet sticking out the back end.

Looking to get $500.00 for it which includes all sales taxes and AnyTime FREE PickUP in Broadview, IL. just
outside of downtown Chicago.

And now for my contact info.

1) First Please don't WASTE MY TIME trying to get my Bank Account info and PWrds via the latest "Zelle" scam(s). If you are NOT LOCAL to me and want to send a cousin or another relative, who just happens to live in the same town as me to buy this item that's OK. Just Zelle them the $500 first, and have them bring it by in CA$H!!

But first please call me on my landline to make sure this item is still available. My Phone is connected to a wall jack with a wire - it's a old Black Rotary Dial Bakelite telephone. This number is NOT TXTable, so YOU CAN NOT send TXT messages or any MULTImedia data to it, just your own voice will do. (708) 387-72 Fiver Oner.

Ask for Gregory (K9OY), as ANNE (OYN) does NOT LIVE HERE ANYMORE!!!
Thanks.....

Thanks;
Gregory Gately (K9OY)
Broadview, IL. 60155

-----> I have received a Deposit on this item - pending pickup.

WTB: B4x/TB4X tower section

Date Posted By Category User IP
2022-10-03********Towers & Access********
Looking for section 4 of Rohn or Rohn-like BX tower. I am located in Vermont. Email is erisi at comcast dot net

Rohn 25 Needed in upper Maine

Date Posted By Category User IP
2022-09-26********Towers & Access********
I'm looking for several Rohn 25 straight sections. I'm located in upper Maine in Easton FN66. Southern Maine is a 4 hour drive from me. Shipping is possible depending on sale price!

TENSION GAUGEs tool for sailboat and towers.

Date Posted By Category User IP
2022-09-21********Towers & Access********
Loos & Co. Tension tool Model PT-2 & PT-3
Tension tool for sailboat and towers.
Model PT-2 & PT-3
These are like new condition and much less then what they cost new. Selling both together.
Pick up only no shipping
$300

US TOWER TMM-433 SS FOR SALE

Date Posted By Category User IP
2022-09-18********Towers & Access********
For Sale
US TOWER TMM-433 SS
This tower has a manual crank and an electric crank up. It also has the Tilt over capability for easy maintenance. It is a stand alone tower and needs no guy wires.
Comes with some new steel cables and hardware.
Also has some standoffs for coax.
In Scio Oregon
$2000
Text OK. 503.884.6247

You or carrier pick up, I cannot ship.

Used Rohn 25 Wanted in Northern Maine

Date Posted By Category User IP
2022-09-13********Towers & Access********
I'm very far up in Maine. Looking for up to 10pcs R25 straight sections and 3 tops-prefer tops with mast bolt 25AG-3. I would need to rent a truck or have them shipped to me. I'm 3 hours north of Bangor, ME

ROHN 45 GUYS. AND TORQUE BARS THREE TOTAL

Date Posted By Category User IP
2022-09-11********Towers & Access********
100FT LONG each one. THREE TOTAL
CENTER SECTION OF GUY MEASURES .024
includes
3 TB45 bars
3 HD TURNBUCKLES
3 SETS OF INSULATORS
OVER $2000.00 NEW
all in good condition...no kinks...light surface rust on one end of turnbuckles
$600.00 OBO + SHIPPING
OPEN TO TRADES

Rohn TB-3 New with Hardware

Date Posted By Category User IP
2022-09-10********Towers & Access********
SOLD!New Rohn TB-3 Thrust Bearing with four (4) A325 nuts & bolts mounting hardware $ shipped. Thanks, Dave N3EJT

Wanted Tower help

Date Posted By Category User IP
2022-09-08********Towers & Access********
I have a 45 ft Rohn tower secured to the side of the house at about the 20 ft level, no guy wires. Has been installed this way for over 20 years. Very secure. Installed a new rotor about 7 years ago. Suddenly it quit rotating. I can hear the brake engage. I need someone to climb the tower to troubleshoot the problem. I am in Southern Oklahoma. If you are interested in providing this service contact me with pricing.
Thanks,
Wa5yom

Classifieds Statistics

Ads Posted last 30 days: 760
Ads Posted last week: 125
Ads Posted last 24 Hours: 3
Ads SOLD past week!: 19

Welcome Guest!

You are currently viewing all recent Ads.
Consider registering with eHam to give you more viewing options and a chance to send enquiries to AD posters.
If you have problems, questions or comments, please write the Classifieds Manager.