Manager


Manager - NA6M
Manager Notes

Classifieds Home

Showing 101-120 of 5,785 items.

Tower Trailer with HDX-5106MDPL made by US Tower

Date Posted By Category User IP
2022-03-13********Towers & Access********
SOLD!The trailer part is in good shape.
The tower itself has no rust that I can see. The cables and other components need to be replaced.
The tower rasing fixture was originally hydraulic but the rams and pump are bad. I was going to purchase off the shelf rams and pump to replace them. You could also work out a winch system to tilt the tower. Many possibilities!

Pictures https://photos.app.goo.gl/c44VvtqbfTLxc6YY9

New these trailers were over $100,000
Asking $5500 obo

Thanks
Kent
N6WT

US Tower model MA-550/Coaxial Cable++

Date Posted By Category User IP
2022-03-11********Towers & Access********
Used US tower model MA-550. Includes tilting post and winch, and telescoping tower. $2500.00. I also have many, many boxes of coaxial cable. Located in Weston, Texas, North of Dallas.

55 ft crank up tower

Date Posted By Category User IP
2022-03-10********Towers & Access********
Sold

US Tower model MA-550/Coaxial Cable++

Date Posted By Category User IP
2022-03-10********Towers & Access********
Very nice US Tower model MA-550. This has a tubular three section mast with hinged base and raising fixture. We also have lots of antenna coaxial cable. Located in Weston, Texas(a little North of Dallas). Text 214-215-7387 with questions. $2,500.00. Thanks for lookin:)

US Tower MA-550 MDP with extras

Date Posted By Category User IP
2022-02-14********Towers & Access********
US Tower MA-550 MDP with MAF Raising Fixture
Remote Control RMC-1000 to raise and lower tower from the shack
Yaesu G-2800 Rotor with G2800 XA Controller
Rotor and RMC cable not sure how much
Bought this tower from a ham that was moving and did not want to take it with him. I had plans to set it up at a second QTH but that fell through.
This tower new with all the accessories is over $14000, asking $4500 obo.
Will deliver in a reasonable amount of mileage. It is sitting on my trailer right now, you just have to have a way to get it off when I arrive.
Photos: https://photos.app.goo.gl/Zt2ptEBW8EAsccPv5

Thanks
Kent
N6WT

Looking for Tubular Tower

Date Posted By Category User IP
2022-02-09********Towers & Access********
looking for a good used tubular either crank up or electric tower, hopefully around ohio somewhere, if you have one and havent been using it and will sell it, i might be interested, please contact me with your location and price, prefer taken down, im to old to do to much lol. thanks everyone and god bless, Bill wc8i. 740-751-8626

Rohn 25 Stuff

Date Posted By Category User IP
2022-02-08********Towers & Access********
Rohn stuff, almost new. All hardware, galvanizing perfect. This is what I have left from the photo...

- Rohn SA253UA heavy duty dual sidearm for up to 2" riser, for Rohn 25, all hot dipped galvanized. These are $209.99 new, $100 each (I have several)

- Rohn UHF25G - They allow for the installation of small antennas utilizing 7/8 in. to 1 1/8 in. o.d. masts at a 1 ft. spacing from the tower leg. They can also be used as a mounting point for an HF dipole antennas. These are $44 new, I have these for $25 each (I have several)

- Rohn 25G Short base, for installing in concrete. $94 new, this one is $50.


Telescopic Mast

Date Posted By Category User IP
2022-02-01********Towers & Access********
MFJ Telescopic model 1910 33' mast never used $75 Shipped


SOLD

MA770MDP Motorized Tubular 70 ft Tower $6K

Date Posted By Category User IP
2022-01-31********Towers & Access********
SOLD!(SteppIR is not included - see separate ad)
Moving to a condo First $6000 takes this beautiful 70 ft Tower.. Pick up only in San Diego. This tower is just 6 years old and still works and looks great Has all options including remote control for your shack, Tilt over and Rotor base . If you bought new from US Tower it would cost
MA-770MDP $12,325
MARB770 $2940
RMC1000 $1650
MAF770 $1065
CX4M arms $425

Pick up by February 15 and I'll throw in the Yaesu G-1000DX Rotor..

73, Howard W6HDG

MA770MDP 70 ft. Motorized Tubular US Tower

Date Posted By Category User IP
2022-01-31********Towers & Access********
SOLD!(SteppIR is not included )
Moving to a condo First $6000 takes this beautiful 70 ft Tower.. Pick up only in San Diego. This tower is just 6 years old and still works and looks great Has all options including remote control for your shack, Tilt over and Rotor base .

If you bought new from US Tower it would cost over $18K.

MA-770MDP $12,325
MARB770 $2940
RMC1000 $1650
MAF770 $1065
CX4M arms $425

Pick up by February 15 and I'll throw in the Yaesu G-1000DX Rotor.. You bring the flatbed and I'll pay for the crane.

73, Howard W6HDG

Universal towers “30 straight” tower section

Date Posted By Category User IP
2022-01-23********Towers & Access********
I have one Universal towers 30” straight 10’ tower section for sale. I decided to only take my 35-40 tower to 50’ instead of 60’. Was purchased new from Universal Towers in Sept 2021 & sitting in backyard since. This sells for between $600-700 and will sell for $450. Due to cost of shipping, this is pu only near Indpls, In. Will consider meeting with tower section on trailer up to 100-150 miles for extra $75. COD or Paypal accepted. Rick, KM9E. 317-508-0934.

Yaesu (Rotator) GC-038 Lower Mast Bracket NIB

Date Posted By Category User IP
2022-01-17********Towers & Access********
SOLD!Yaesu GC-038 Lower Mast Bracket (NIB) for Yaesu G-400, G-800, G-1000, and G-5400/G-5600 Rotators. Bought in the late 1990s for anticipated use, but never needed it; has been unopened either in basement or garage since. $25 PayPal (no tacked-on fee either); includes US/Canada shipping. JJ, WR5E.

Loos & Co. Tension tool Model PT-2 & PT-3

Date Posted By Category User IP
2022-01-11********Towers & Access********
Tension tool for sailboat and towers.
Model PT-2 & PT-3
These are like new condition and much less then what they cost new. Selling both together.
Pick up only no shipping $300 for both of them

WTB: Controller for SteppIR DB18E

Date Posted By Category User IP
2022-01-08********Towers & Access********
SOLD!I have a chance to buy a DB18E but the controller is missing. Does anyone have one at a reasonable price? Please state price with reply. Please reply via email, phone or text, 24/7. This is my first yagi experience! Thank you, 73 & stay safe! Bruce; KN4IDF good on QRZ.

17.5' Glen-Martin RT-1832 Rooftop Tower

Date Posted By Category User IP
2022-01-04********Towers & Access********
Selling my Glen-Martin RT-1832 rooftop (or ground mounted) 17 ½’ tower.

Included is the tower, currently in two sections, with a Glen-Martin 2 5/8” thrust bearing at the top and a rotor plate down from the top. Also included are 4 mounting feet and a bag of ¼” stainless steel bolts and nyloc nuts for tower reassembly.

These sold for over $1,100 when Glen-Martin quit making them. I am asking $700.00, local pickup or I will meet you within a reasonable distance from the Sulphur Springs, TX area.

This is easy to transport with the bottom section on the roof rack and the top section inside the vehicle as I did, or also on the roof rack. Each section is 9’ long. Or bring a trailer.

Contact me at my ARRL email at my call sign at arrl dot org.

Aluma Tower ECT-20 Heavy Duty Comm Trailer

Date Posted By Category User IP
2021-12-30********Towers & Access********
Hello everyone, I have for sale an Aluma Tower ECT-20 Heavy Duty Communication Trailer in great shape. Trailer is stored in Frisco, TX at the moment. For more pictures please visit: https://imgur.com/a/MYCiagr
Please email me for detailed info, email address is good on QRZ.
Thanks and 73!

Rohn 25 Stuff, updated...

Date Posted By Category User IP
2021-12-24********Towers & Access********
Rohn stuff, almost new. All hardware, galvanizing perfect, local pickup only, Youngsville NC USA

- Rohn SA253UA heavy duty dual sidearm for up to 2" riser, for Rohn 25, all hot dipped galvanized. These are $209.99 new, $100 each (I have several)

- Rohn UHF25G - They allow for the installation of small antennas utilizing 7/8 in. to 1 1/8 in. o.d. masts at a 1 ft. spacing from the tower leg. They can also be used as a mounting point for an HF dipole antennas. These are $44 new, I have these for $25 each (I have several)

- Rohn 25G Short base, for installing in concrete. $94 new, this one is $50.

FOR SALE: 87ft Rohn 45G Tower w/accessories

Date Posted By Category User IP
2021-12-19********Towers & Access********
Like NEW: 87ft Rohn 45G Tower, includes:
(1) Mosely Classic 33 yagi miscellaneous guy wire
(1) DB420 Ant 450-470MHZ
(1) 125ft of Andrews 7/8 Heliax
(1) 150MHZ 6 element yagi
$1,000 cash
Pick up only - Daytona Beach, FL
Leave Voicemail: 386-252-8719 or
Email: W~~~~@A~~~.NET

US Tower TMM-433SS

Date Posted By Category User IP
2021-12-12********Towers & Access********
SOLD!33 Foot crank up with aftermarket motor.
Tilt over assm.
New cables in box.
Tower is 11 yrs old in good shape. Cables not frayed but should be replaced.
Live in Suisun City California, come by with trailer to pick unit up for free.
Please Email for questions or interest.

Rohn 25 Stuff, updated...

Date Posted By Category User IP
2021-12-12********Towers & Access********
Rohn stuff, almost new. All hardware, galvanizing perfect, local pickup only, Youngsville NC USA

- Rohn SA253UA heavy duty dual sidearm for up to 2" riser, for Rohn 25, all hot dipped galvanized. These are $209.99 new, $100 each (I have several)

- Rohn UHF25G - They allow for the installation of small antennas utilizing 7/8 in. to 1 1/8 in. o.d. masts at a 1 ft. spacing from the tower leg. They can also be used as a mounting point for an HF dipole antennas. These are $44 new, I have these for $25 each (I have several)

***SOLD*** - Rohn HB25BG house bracket for 25G tower. Practically new, no rust. Adjustable stand off up to 24". $149 new, this one is $75

***SOLD*** - Rohn Top 25G, perfect condition. These are $249 new, this one is $125

***SOLD*** - Rohn 25G straight sections, 10' long. $158 new, these are $75 each (I have 2 at this time).

- Rohn 25G Short base, for installing in concrete. $94 new, this one is $50.

Classifieds Statistics

Ads Posted last 30 days: 760
Ads Posted last week: 125
Ads Posted last 24 Hours: 3
Ads SOLD past week!: 19

Welcome Guest!

You are currently viewing all recent Ads.
Consider registering with eHam to give you more viewing options and a chance to send enquiries to AD posters.
If you have problems, questions or comments, please write the Classifieds Manager.