Manager


Manager - NA6M
Manager Notes

Classifieds Home

Showing 241-260 of 4,107 items.

Nice CDE/Hy-Gain Ham 4 Rotator

Date Posted By Category User IP
2021-08-01********Rotators********

.
Nice CDE/Hy-Gain Ham 4 Rotator
excellent condition like new
with all hardware included
recent refurbish service
brand-new ball bearings
fresh oem premium lube
SS screws terminal strip
control box included
with operation manual
sell for $335 plus ship
email for more info
Thanks!

2 CDE Hy-Gain Lower Mast Support Mounts

Date Posted By Category User IP
2021-07-31********Rotators********
Two good used CDE/Hy-Gain Lower Mast Support Mounts. One has the aluminum cable connector plate (for screw type connectors). Both have hardware except the center bolt (standard 1/4-20 as I recall, will look to see if I have a couple stainless ones and include, replaced the nuts and washers in the photo with new stainless). More photos available if needed.

$80 shipped (tracked) US. Prefer paypal (friends and family, MO, Teller's Check, regular paypal plus 3.5%...

Nice Tail Twister T2X Rotator

Date Posted By Category User IP
2021-07-30********Rotators********
Nice Tail Twister T2X Rotator
excellent condition like new
with all hardware included
recent refurbish service
brand-new ball bearings
fresh oem premium lube
SS screws terminal strip
control box included
with operation manual
sell for $435 plus ship
email for more info1
Thanks!

Ham IV Rotor

Date Posted By Category User IP
2021-07-24********Rotators********
This rotor has been completely refurbished and brought up to the latest Ham-IV configuration. Has the AMP plug on the bottom. Includes the matching female plug, with gold plated pins, to install on your control cable. No more rusted out terminal strip or installing screw terminals at the top of the tower. New SS U- bolts and SS bolts in Bell housing.
This is the rotor only, does not include a control box.
$ 225 plus shipping

CDE/Hy-Gain CD-45 Rotator

Date Posted By Category User IP
2021-07-23********Rotators********
CDE/Hy-Gain CD-45 Rotator
excellent condition like new
with all hardware included
recent refurbish service
brand-new ball bearings
fresh oem premium lube
SS screws terminal strip
control box included
with operation manual
sell for $235 plus ship
email for more info
Thanks!!

SOLD

Date Posted By Category User IP
2021-07-23********Rotators********
Selling my Yaesu G5500 rotator, in excellent condition. I had it up for one year before moving due to work, and since then lost interest in EME. Controller had a slight dent in one side due to shipping from manufacturer, but did not affect its operation. No control cables included. $550 and buyer pays for shipping costs. More photos available upon request.

SOLD Alliance U-100 rotors

Date Posted By Category User IP
2021-07-22********Rotators********
Free to a good home, two & a half U-100 rotors. Two appear to be OK and one is disassembled, maybe for servicing? Includes the service manual. Includes three control boxes and one bottom support bracket. As you probably know, the mast runs completely through the U-100, making it ideal for a low-cost AZ/EL rotor setup. One mast serves as a crossboom. Pick up only in Walnut Creek, CA.

Sorry, they are gone.

Want to Buy:TIC General Ringrotor

Date Posted By Category User IP
2021-07-20********Rotators********
Want to Buy:TIC General Ringrotor motor, model 1032C or similar. Will buy the complete Ringrotor and controller or just the motor. Will pay top dollar.
Must be in good working condition, and prefer motor w/ potentiometer. Let me know what you have. Thanks, Charlie Hugg, K5MBX

CDE Rotator Control Box

Date Posted By Category User IP
2021-07-20********Rotators********
Here is an old CDE rotor control box for parts or repair.

This is a parts or repair unit. The meter face needs polishing. Inside looks complete except for the large motor run capacitor is missing. The front switch knob is missing too.

$15.00 plus shipping from Texas. It weighs about 8 pounds I think.

PRO.SIS.TEL. PST2051-641 ANTENNA ROTOR

Date Posted By Category User IP
2021-07-19********Rotators********
SOLD!PRO.SIS.TEL. ANTENNA ROTOR PST2051-641 NEVER INSTALLED OR USED - NO CONTROLLER. COMPLETE WITH DETAILED BOUND MANUAL $360.00 ADDITIONAL PHOTOS ARE AVAILABLE
Up for your consideration is a PRO. SIS. TEL. mod. # PST2051-641 antenna rotor. This sale is for the rotor unit only. This is a very heavy duty antenna rotor that is Italian made. This is a very well known and used brand by hams that need and wish to use the very best of rotators that are available. I would refer you to the Array Solutions web site for a full view and detailed description of this and the other PRO. SIS. TEL. rotor line. This model lists for $575.00 plus tax. I offer that at this price and free shipping for a unused model PST2051-641 is a very good price - as long as you can live with the chipped blue paint!! Some of the larger ones go for thousands of dollars. Some of the larger ones are also used on US Naval ships. It is "very" solidly built rotor and has a worm drive. It would need a controller unit for operation - Green Heron Electronics make a very nice digital one and I believe PRO. SIS. TEL. also makes one. You could check for recommendations from Array Solutions. I did notice there is a matching control unit for sale (Green Heron I believe) listed on eBay. I purchased this rotor as a intended club project for use on a cart mounted crank-up mast for EMCOM work - the control unit was never purchased and the club was not able to go thru with the plan to build the mobile EMCOM cart. As stated this unit was never installed or used in any way. When describing and taking the photos I wanted it to appear as it actually is - there is some of the blue paint that has chipped off showing the white undercoat used by the factory. This is just storage/shelf rash. It has always been stored indoors in my garage. You will also notice that there is a photo of a short (22" long) carbon steal tube flanged on one end. This was originally intended for mounting the rotor to the planned EMCOM antenna cart - you can have this free if you would like it BUT you will need to pay the shipping for it. It is one tough 2" dia. tube should you want/need it. If you have any questions please ask. Thanks. Here are some specifications for it:
Pro.Sis.Tel PST 641D rotator without controller. Wind area: 1.2 m2 (12.9 sqft). Vertical load: 350 kg (771 lbs).

Medium duty antenna Rotator, handle up 1.2 m2 (13 sq. Ft.) of antenna windload.

Worm-wheel technology irreversible under mast torque.

Large starting and braking torque

Soft start e soft stop with programmable ramp speed.





Specifications:

- Max wind load area 1.2 m²

- Braking torque 1.959Kgcm = 192Nm

- Rotating torque 1.000Kgcm = 98Nm

- Max vertical load 350Kg

- Motor voltage 12 VDC

- Rotating range 500° (70+360+70)

- Rotation speed ~90 secondi per 360°

- Reading accuracy ~1% no backlash

- Antenna mast OD 48-50mm

- Operational temperature range (°C): rotor unit -40° ÷ +60°

control box -20° ÷ +60°

- Storage temperature (°C): rotor unit -40° ÷ +70°

control box -25° ÷ +60°

- Control box power input 230VAC (115VAC) , 50-60Hz, 50VA

- Direction reading Digital (potentiometer)

- Limits Electronic, adjustable by software

- Rotator cable 5 wires (2 x 1mm² + 3 x 0,5mm²)

- Weight (rotator only) ~ 5 kg



Some details:

- High strenght cast alluminium gear box

- Rugged and proven design.

- Nickel chromium-molybdenum steel and bronze alloy gears

running on balls bearings

- No maitenance, life lubrificated.

- Strength steel galvanized mast clamp.

- Stainless steel bolts.


- IP55



Hy-Gain T-2X Tailtwister Rotator and Controller

Date Posted By Category User IP
2021-07-17********Rotators********
SOLD!I have an Hy-Gain T-2X Rotator and Controller. This rotator is a large Tailtwister unit and includes the matching control unit. Included with the rotator is a brand new DX Engineering 125’ of CW8 HD Control Cable.

Pickup in Phoenix, Arizona within 100 miles of my QTH. I will accept cash, money order, and personal checks, but check will have to clear before shipping.

As Asking $425.00.
NN7R
Patrick Birney

Hy-Gain Tail Twister model T2X rotor

Date Posted By Category User IP
2021-07-17********Rotators********
.
Looking for a Hy-Gain Tail Twister
model T2X rotor in any condition!
Can be with or without a control box
can be broken and needs to be fixed
can be ugly, only good for spare parts
or just unloved in need of a new home
E-mail me for more info and leads!
Thanks!1

yaesu G-800DXA

Date Posted By Category User IP
2021-07-16********Rotators********
I have for sale a yaesu g-800dxa rotator in good working and cosmetic condition complete with approximately 50 feet of control cable asking 300 plus shipping if needed thank you.
Peter
KF4JIA
SOLD

YAESU G-800DXA ROTATOR

Date Posted By Category User IP
2021-07-14********Rotators********
I have for sale a yaesu g-800dxa rotator in good working and cosmetic condition complete with approximately 50 feet of control cable asking 300 plus shipping if needed thank you.
Peter
KF4JIA

WTB: Chameleon RT-RR rotator-tuner

Date Posted By Category User IP
2021-07-13********Rotators********
Looking for the RT-RR rotator-tuner for the Chameleon Mag Loop antenna.
Please state condition and price shipped to 99354.
Am ok in QRZ.com
Dave KK7SS
UPDATE:
Please note that I ask for pictures of the actual item and a price:
I've been getting answers with no pictures and no price. I will not respond to those! I've been scammed twice on this -- no more ! Thanks.

Pending HD-73 Like New Rebuilt Rotor & Control

Date Posted By Category User IP
2021-07-11********Rotators********
SOLD!Pending Alliance dual speed HD-73 rotor, control box, mast clamp and manual. Complete rebuild, bearings, greased and most stainless steel bolts/washers replaced. New stainless screws on terminal strip. Anti-seize applied on threads of dissimilar metals. Covers cleaned, blasted and repainted. Pot cleaned w/Deoxit, Meter movement is very smooth. Can handle up to 10.7 sq feet of wind load. Mast size up to 2.5" OD. I have pics of the re-build, just ask. $250 + shipping. If interested or want to see more pics call Dave at 301 233-0910 Thanks, N3EJT

WTB AR22 rotor

Date Posted By Category User IP
2021-07-10********Rotators********
I have the controller and somehow lost the rotor and perhaps someone has found one while cleaning out the shack. The mast mount would be great to go along with the rotor.

EA4TX ARS USB

Date Posted By Category User IP
2021-07-10********Rotators********
SOLD!I have on sale 2 EA4TX ARS USB with both USB cables. I have them since 2 years ago, the use has been very short. One of them have a new board that was switched about 6 months ago. I’m asking $175 each shipped.

Hy-Gain Tail Twister T2X Rotor!

Date Posted By Category User IP
2021-07-09********Rotators********
.
Looking for a Hy-Gain Tail Twister
(or Ham 4) rotor in any condition
can be with or without a control box
can be broken and needs to be fixed
can be ugly, only good for spare parts
or just unloved in need of a new home
E-mail me for more info and leads!
Thanks!1

NEW SPID Rotator Rotor and Digital COntrol

Date Posted By Category User IP
2021-07-09********Rotators********
SOLD!NEW Spid ham antenna rotator Model RA-U and Spid digital control box. Look it up on Ham Radio Outlet catalog. 1 degree accuracy. Ultra reliable motor drive. New cost $939, our price $450

Classifieds Statistics

Ads Posted last 30 days: 760
Ads Posted last week: 124
Ads Posted last 24 Hours: 3
Ads SOLD past week!: 20

Welcome Guest!

You are currently viewing all recent Ads.
Consider registering with eHam to give you more viewing options and a chance to send enquiries to AD posters.
If you have problems, questions or comments, please write the Classifieds Manager.