Pages: [1]   Go Down

Author Topic: Help with IF232 25 pin to Rigblaster Advantage 9 pin both RS232 ends  (Read 2976 times)

VA7MDD

  • Member
  • Posts: 1
Help with IF232 25 pin to Rigblaster Advantage 9 pin both RS232 ends
« on: March 12, 2016, 05:28:32 PM »
I am trying to connect my radio with HRD and the nine pin end of the above cable was broken off at the connector.  The only wire that I can be sure of is pin 2 at the 25 pin end, and that is connected to pin 3 at the 9 pin end.

The wires at the 25 pin end are connected to pins 1,2,3,4,5, and 7.  Can anybody verify the pin to pin connection at the nine pin end please?
Logged
Pages: [1]   Go Up
« previous next »