Print

[ON3BM]

dear Knights of the Ham
ON3BM
Remote and Audio
Using w7/ft1200dx/scu-17/
PC (remote sever) -  laptop (client)
pc connected to scu (usb)
scu connect to rig  (data cable)
                                     cable serial PTT
No problem to connect laptop and pc using HRD 6.3
Problem : AUDIO
installed RemAud on pc and on laptop with same settings (ip/pas etc)
HRD on server :off
Norton security :off (client =laptop)
Radio : on (server)
Connection with RemAud on server: ok
NO AUDIO only noice
About Audio
on pc (server) scu installed silicon labs com port 11 (enhanced)
                                                                      com port 12 (basic)
on laptop  com11 and com 12 (hidden) no com ptt
on laptop (client ) high definition ( mic- speaker)
no possibiity to add ex com 11/com12
like to find a knight in the Hamhood who has a working system with
this configuration
or advice  about my problem with the souncards /com ports
or a system with ft1200dx and interface that do the job
thank you for your attention

[ON3BM]

I thank everybody who gives some help
Finaly I saw the light
system is working
73 ON3BM