Pages: [1]   Go Down

Author Topic: Icom RS-BA1 and 706 series radios  (Read 2375 times)

AF5CC

  • Posts: 1664
    • HomeURL
Icom RS-BA1 and 706 series radios
« on: October 15, 2018, 10:10:52 AM »
Has anyone used the Icom RS-BA1 software with the Icom 706 series of radios?  If it does interface ok, what can and can't it control on the 706?

73 JOhn AF5CC
Logged

K6UFO

  • Member
  • Posts: 4
RE: Icom RS-BA1 and 706 series radios
« Reply #1 on: October 15, 2018, 07:47:28 PM »
The Icom specifications and Instruction manual are at
http://www.icomamerica.com/en/products/amateur/hf/rsba1/specifications.aspx
It appears that it has to be an Icom radio with an ethernet connector or a USB connector.
I think that leaves out the 706.
Logged

AF5CC

  • Posts: 1664
    • HomeURL
RE: Icom RS-BA1 and 706 series radios
« Reply #2 on: October 16, 2018, 11:06:00 PM »
Thanks for the reply, but if you look at the brochure for the RS-BA1 it shows that it works with the Icom 7000, Icom 756PROIII and the 746PRO.  None of these have USB or ethernet jacks, just the CI-V jack.

73 John AF5CC
Logged

KL7EDK

  • Member
  • Posts: 9
RE: Icom RS-BA1 and 706 series radios
« Reply #3 on: December 06, 2018, 04:47:01 PM »
The 7000, 756P3, 746pro all have  CI-V REMOTE CONTROL JACKS. 
You will need other interface items in order to do what you wish and it might get a bit messy.
Jerry
Logged
Pages: [1]   Go Up
« previous next »