Pages: 1 [2]   Go Down

Author Topic: DIY stepped attenuators  (Read 1941 times)

KX4OM

  • Posts: 533
    • HomeURL
RE: DIY stepped attenuators
« Reply #15 on: November 20, 2018, 01:54:48 PM »

Here is mine, based on the ARRL Handbook. I built it back in 2000 or there about. Notice the compartment shielding. I use this with my Poor Ham's Scalar Network Analyzer and scope, etc.

http://www.kx4om.com/Projects/Step_Attenuator/step_atten.html

Ted, KX4OM
Logged
Pages: 1 [2]   Go Up