Pages: [1]   Go Down

Author Topic: Leader LPM-880 Power Meter Dummy Load Schematic or Manual ?  (Read 51 times)

ON7MA

  • Posts: 2
    • HomeURL
Leader LPM-880 Power Meter Dummy Load Schematic or Manual ?
« on: January 21, 2020, 05:26:29 AM »

Hello, there
I am doing a restoration of a LPM-880 Leader Dummy Load power meter
Does any have the Manual of this power meter ?
Especially Schematic and exact type of Diode Used...

Tnx in advance

Jemp
Logged

WB0CJB

  • Member
  • Posts: 274
Re: Leader LPM-880 Power Meter Dummy Load Schematic or Manual ?
« Reply #1 on: January 21, 2020, 06:05:34 AM »

I've got an LPM -887 model. Not sure what the difference is.

Paul WB0CJB
Logged

WB0CJB

  • Member
  • Posts: 274
Re: Leader LPM-880 Power Meter Dummy Load Schematic or Manual ?
« Reply #2 on: January 21, 2020, 06:29:55 AM »

I would use an 1N60 diode. This crosses to an NTE110.

 I just repaired a Drake MN-2000 using a pair of NTE110 diodes. The tuner originally used a pair of 1N34 diodes that crossed to NTE 109. But I already had the 110s so I  stuck them in. They work fine.

WB0CJB
Logged
Pages: [1]   Go Up