Pages: [1]   Go Down

Author Topic: FT101ZD Speech processor issues  (Read 59 times)

VU2YK

  • Member
  • Posts: 37
FT101ZD Speech processor issues
« on: April 09, 2020, 04:58:11 PM »


Hello

My FT101ZD speech compressor not working as it should.

Radio was lying unused for a couple of years. Locked down, I decided to use it. Initial TX output was low on most bands except on 40.

Cleaned bandswitch with DeOxit (used sparingly). Now output on most bands is from 80 to 100 watts. Only on 160 meters 40 watts.

Except On 14.400 output 100 watts and on 14.000 output drops to 30 watts.

Speech compressor does not work as it should. Power out is 100 watts without processor.

Dips to 40 watts with compressor on. Tried alignment and adjusting T404 still no good.
Any suggestions. Thanks.

RAHUL. VU2YK.
Logged
Pages: [1]   Go Up