Pages: [1]   Go Down

Author Topic: Arcom RC-210 interface to a GE Master II  (Read 85 times)

N4AWP

  • Member
  • Posts: 28
Arcom RC-210 interface to a GE Master II
« on: May 19, 2021, 11:45:17 AM »

Our club, K4RNC, has a RC-210 and we want to use it with our Master II repeater. As I understand, Arcom said to check Repeater Builder and I find very sketchy information. I found a NHRC-M2/SC Repeater Controller Interface Card but the company is out of business. I emailed the only contact I could find for them but no reply. Has anyone interfaced the 210 to the Master II and how did you do it??

Thanks for any help we can get.
Butch N4AWP
Logged

N2AYM

  • Member
  • Posts: 375
Re: Arcom RC-210 interface to a GE Master II
« Reply #1 on: May 19, 2021, 12:59:49 PM »

You left out specific information that could allow some hams to answer your questions.
Is this GE Master II repeater a converted Mastr II mobile or a converted Mastr II station ?
I am not familiar with the 210 - I must assume it is a rack mount controller - is that so?
Logged

N4AWP

  • Member
  • Posts: 28
Re: Arcom RC-210 interface to a GE Master II
« Reply #2 on: May 20, 2021, 02:51:15 AM »

Yes it is rack mounted and is not the mobile. As far as a converted station I can't answer that. The controller is a Arcom RC-210. We are currently using a Pion and Simon PSE-508 controller.

Thanks for your reply
Logged

KA5IPF

  • Member
  • Posts: 1824
    • homeURL
Re: Arcom RC-210 interface to a GE Master II
« Reply #3 on: May 20, 2021, 07:37:59 PM »

Both repeater builder and Arcom RC210 controllers have groups on groups.io Plenty of help available both places, lots of MII's in use.
Group names:
repeater-builder
rc210

Logged
Pages: [1]   Go Up