Pages: [1]   Go Down

Author Topic: Upgrading the ICOM IC-705 with BHI's Noise Reduction Module  (Read 190 times)

KE7MAV

  • Member
  • Posts: 2
Upgrading the ICOM IC-705 with BHI's Noise Reduction Module
« on: August 06, 2021, 03:45:48 PM »

I've published an article on QRPer.com that describes how to add BHI Ltd.'s noise reduction to the IC-705 by tapping into the low level audio.

I hope this is of interest to some. If you have the skill it's well worth the effort to upgrade the transceiver this way:

https://qrper.com/2021/08/upgrading-the-icom-ic-705-with-bhis-amazing-noise-reduction-module/

73, Guy
Logged

KN6SU

  • Member
  • Posts: 76
Re: Upgrading the ICOM IC-705 with BHI's Noise Reduction Module
« Reply #1 on: August 08, 2021, 10:27:04 PM »

Well, I listened to the video and while the DSP add-on reduces the hisses and crackles I actually thought the the voice was more intelligible with it off...some may like what this filter does, but I think I'll use my 705 as it is...and  frankly the built in filters (not just NR) are extremely good.
Logged
Pages: [1]   Go Up