Pages: [1]   Go Down

Author Topic: APRS ON FTM-400XDE  (Read 176 times)

SA4MDN

  • Member
  • Posts: 162
APRS ON FTM-400XDE
« on: January 02, 2022, 03:01:54 PM »

FTM-400-XDE connected to a duel band antenna sitting about 40FT up, decent swr at 1.5.1, about 50% of the received APRS beacons activate the screen, the ones that don't activate the screen still show in the received list,

 KW TH-D 74 connected to duel band antenna sitting about 2FT above ground level swr 1.5.1 all received APRS beacons activate the screen,

 any reason anyone might know why half the beacons received on the 400 are in the received list but no show on the screen when received

Thanks, Mick
Logged

KD4UPL

  • Member
  • Posts: 68
Re: APRS ON FTM-400XDE
« Reply #1 on: January 02, 2022, 06:48:20 PM »

You can tell the radio what beacons you want displayed. It will only display the types you tell it too. Do you have the APRS manual or just the manual that comes with the radio? You really need the APRS manual too. The sort function is on page 35.
Logged

SA4MDN

  • Member
  • Posts: 162
Re: APRS ON FTM-400XDE
« Reply #2 on: January 03, 2022, 01:14:55 AM »

Beacon Filter is set to all, Maybe the D74 is just better at APRS than the Yeasu, Thanks
« Last Edit: January 03, 2022, 01:23:58 AM by SA4MDN »
Logged
Pages: [1]   Go Up