Pages: [1]   Go Down

Author Topic: ft8 with wsjtx what going on  (Read 368 times)

EI9GMB

  • Member
  • Posts: 55
ft8 with wsjtx what going on
« on: August 25, 2022, 09:13:34 AM »

  when am using wsjtx  and when i finish my qso with a station with 73s it save it to my log  but then after that it connects to same station again and enters log again why dose this happen connecting to same station twice how do i avoid this.
Logged

K6SDW

  • Posts: 528
    • HomeURL
Re: ft8 with wsjtx what going on
« Reply #1 on: August 25, 2022, 11:52:53 AM »
This happens to me on occasion, I'm guessing either your station or the other station hasn't received the final ack...especially during very busy band conditions and working DX...

73/GL
Logged

K4WH

  • Member
  • Posts: 109
Re: ft8 with wsjtx what going on
« Reply #2 on: August 25, 2022, 02:31:32 PM »

Happens to me also.  Just a thing that happens.
Logged

WB0FDJ

  • Member
  • Posts: 262
Re: ft8 with wsjtx what going on
« Reply #3 on: August 25, 2022, 06:14:22 PM »
No argument with previous comments. But I see that under Setting/General/Behavior there is a box to check that says "Disable Tx after sending 73". I keep this checked so that the problem you are describing won't happen.

Doc WB0FDJ 73
Logged

KH6AQ

  • Member
  • Posts: 9292
Re: ft8 with wsjtx what going on
« Reply #4 on: August 25, 2022, 08:27:51 PM »
Perhaps your PC enjoys working his PC.
Logged
Pages: [1]   Go Up
« previous next »