Print

[EI9GMB]

  ive just downloaded win4yaseu suite  but i keep getting this error 
  unable to connect to the radio please check the raduio and make sure its powered on.if  win4yaseu still dosnt connect make sure you have correct com port and matching baudrate put in.  I have only one com port com 3 which i use for wsjx do i need to add new com port if so how do i do that

 thanks guys ei9gmb tony

[N1UKX]

With the radio powered on and connected to the computer, you need to go to Control Panel on the computer and then to Device Manager > Ports and see which port the radio is on.
Clicking on the radio under the Ports tab should give you the baud rate.

[G8FXC]

  ive just downloaded win4yaseu suite  but i keep getting this error 
  unable to connect to the radio please check the raduio and make sure its powered on.if  win4yaseu still dosnt connect make sure you have correct com port and matching baudrate put in.  I have only one com port com 3 which i use for wsjx do i need to add new com port if so how do i do that

 thanks guys ei9gmb tony

Install and configure Win4Yaesu with nothing else running on the PC. Point it to the COM port for the radio - presumably the one that you have WSJT-X configured to. Make sure everything works, then create virtual COM ports using one of the port managers - COM0COM is the recommended solution - and use the 3rd Party Software tab in Win4Yaesu configuration to link it to WSJT-X. The result works very well...

Martin (G8FXC)

[EI9GMB]

 the stranges thing martin i am using com3 which i checked under device management ports
 which i use for wsjtx. when i put that in for win4yaseu  keep getting above error as mentioned above ive downloded com0com and tried entering comp ports but keeps comming up comport already in use am confused guys

[G8FXC]

Let's discuss this by PM. I'm a bit tied up tonight, but will be happy to send you some screenshots of my configuration. PM me your email address and I'll send you something tomorrow.

Martin G8FXC