Pages: [1]   Go Down

Author Topic: NO MICORPHONE FOR FT 102  (Read 231 times)

N4MJG

  • Posts: 773
    • HomeURL
NO MICORPHONE FOR FT 102
« on: November 06, 2022, 08:49:08 AM »

FT 102 was gaven to me by my ex uncle atfer someone gave him the ft 102 before me i like the 102 one time i had b1 behgirer mic and which i could keep it !

Jackie
N4MJG
Logged
JACKIE GREEN

WA3SKN

  • Member
  • Posts: 8126
Re: NO MICORPHONE FOR FT 102
« Reply #1 on: November 06, 2022, 03:15:07 PM »

FT102 used a 200-600 ohm mic and 8 pin connector.  The MD1b was a desk mic designed for it... should not be much trouble getting a replacement mic for it.

-Mike.
Logged

N4MJG

  • Posts: 773
    • HomeURL
Re: NO MICORPHONE FOR FT 102
« Reply #2 on: November 06, 2022, 04:40:13 PM »

Mike,
 thank you my friend next if our club our  hamfest or ebay i'll will look for it. that only this is missing someone has kept it or lost it one of 2

Jackie
N4MJG



FT102 used a 200-600 ohm mic and 8 pin connector.  The MD1b was a desk mic designed for it... should not be much trouble getting a replacement mic for it.

-Mike.
Logged
JACKIE GREEN

N8YX

  • Member
  • Posts: 2449
Re: NO MICORPHONE FOR FT 102
« Reply #3 on: November 16, 2022, 01:17:53 PM »

Any of the Yaesu 8-pin hand or desk mics should work fine with it.

As will a JRC/Raytheon RAY- series hand or desk mic. They use the same connector pinout. I use an MD-1B on my JRC gear and RAY-152 HF SSB rig quite often.
Logged
Pages: [1]   Go Up