Pages: [1]   Go Down

Author Topic: WSJT settings problem  (Read 279 times)

WB8PFZ

  • Member
  • Posts: 624
WSJT settings problem
« on: February 03, 2023, 05:00:26 AM »
I am trying to get WSJT running. On the setting page under audio, the input pulldown does not display any choices. What may I be missing? Mike
Logged

W1VT

  • Member
  • Posts: 6071
Re: WSJT settings problem
« Reply #1 on: February 03, 2023, 06:00:22 AM »
Is the audio plugged into the computer?  It won't recognize an input if nothing is plugged in yet.
Logged

WB8PFZ

  • Member
  • Posts: 624
Re: WSJT settings problem
« Reply #2 on: February 03, 2023, 11:14:38 AM »
W1VT, thanks that was it. Now the learning curve. Mike
Logged

WB8PFZ

  • Member
  • Posts: 624
Re: WSJT settings problem
« Reply #3 on: February 04, 2023, 12:33:02 PM »
One more issue. If I have my SignaLink plugged into my computer my sound will not work out of the computer speaker. If I disconnect the cable going to the SignaLink all is well. Is this a common problem? Mike
Logged

K0RS

  • Member
  • Posts: 1501
Re: WSJT settings problem
« Reply #4 on: February 04, 2023, 03:25:38 PM »
Yes, that's typical.  I have a computer's sound plugged into an audio amp and that disables the computer speaker.  Doesn't your radio work the same way?  Plug in headphones and the radio speaker is muted.
Logged
"90% of the people in a pile-up have no idea what's going on.  It's up to you to be in the remaining 10%."  *W9KNI*

WB8PFZ

  • Member
  • Posts: 624
Re: WSJT settings problem
« Reply #5 on: February 04, 2023, 05:05:17 PM »
Well I never plugged a USB cable into my radio...............
Logged
Pages: [1]   Go Up
« previous next »