Home
Help
Search
eHam
>
eHam Forums
>
Mods And Repairs
>
Yaesu FT-101 B and E
« previous
next »
Pages: [
1
]
Go Down
Print
Author
Topic: Yaesu FT-101 B and E (Read 147 times)
N9AMC
Member
Posts: 3
Yaesu FT-101 B and E
«
on:
February 14, 2023, 09:07:40 AM »
I picked up two of these 101s, a B and an E. I seem to recall the radio needs a jumper between pins one and two on either the VFO connector of the ACC connector, but I'm not finding the answer. There is no jumper in place now.
Anyone know?
Thanks
N9AMC
Logged
KG7VQ
Member
Posts: 5
Re: Yaesu FT-101 B and E
«
Reply #1 on:
February 14, 2023, 11:18:47 AM »
Both of the FT-101s I had, had a loctal plug in the back where the jumper was done.
Logged
KG7VQ
Member
Posts: 5
Re: Yaesu FT-101 B and E
«
Reply #2 on:
February 14, 2023, 11:23:52 AM »
oh, and the loctal goes the the accessory socket (p) in my manual.
Logged
N9AMC
Member
Posts: 3
Re: Yaesu FT-101 B and E
«
Reply #3 on:
February 14, 2023, 02:09:46 PM »
Thanks. Since I don't have the plug, I will have to create a jumpter for pins one and two. Nothing is numbered, so I'm having to figure out which are those pins. So, i am narrowing it down. Thanks again for the reply
Logged
Print
Pages: [
1
]
Go Up
« previous
next »
eHam
>
eHam Forums
>
Mods And Repairs
>
Yaesu FT-101 B and E