Pages: [1]   Go Down

Author Topic: Yaesu FT-101 B and E  (Read 144 times)

N9AMC

  • Member
  • Posts: 3
Yaesu FT-101 B and E
« on: February 14, 2023, 09:07:40 AM »

I picked up two of these 101s, a B and an E. I seem to recall the radio needs a jumper between pins one and two on either the VFO connector of the ACC connector, but I'm not finding the answer. There is no jumper in place now.
Anyone know?
Thanks
N9AMC
Logged

KG7VQ

  • Member
  • Posts: 5
Re: Yaesu FT-101 B and E
« Reply #1 on: February 14, 2023, 11:18:47 AM »

Both of the FT-101s I had, had a loctal plug in the back where the jumper was done.
Logged

KG7VQ

  • Member
  • Posts: 5
Re: Yaesu FT-101 B and E
« Reply #2 on: February 14, 2023, 11:23:52 AM »

oh, and the loctal goes the the accessory socket (p) in my manual.
Logged

N9AMC

  • Member
  • Posts: 3
Re: Yaesu FT-101 B and E
« Reply #3 on: February 14, 2023, 02:09:46 PM »

Thanks. Since I don't have the plug, I will  have to create a jumpter for pins one and two. Nothing is numbered, so I'm having to figure out which are those pins. So, i am narrowing it down. Thanks again for the reply
Logged
Pages: [1]   Go Up