Pages: [1]   Go Down

Author Topic: 10 KW CCS ON 6M...USING THE 3CX-6000A7... PART 17  (Read 285 times)

VE7RF

  • Member
  • Posts: 1609
10 KW CCS ON 6M...USING THE 3CX-6000A7... PART 17
« on: February 22, 2023, 01:26:06 PM »
10 KW CCS ON 6M...USING THE 3CX-6000A7... PART 17

Here, the bottom of the cabinet is re-enforced with 1.5" of plywood. Casters added. Notches cut out etc. https://www.youtube.com/watch?v=1HiuMP3iieQ

Plate xfmr installed.
Logged

VR2AX

  • Member
  • Posts: 2233
Re: 10 KW CCS ON 6M...USING THE 3CX-6000A7... PART 17
« Reply #1 on: February 24, 2023, 12:15:40 PM »
Good info, but why place the heavy thing in the bottom left quadrant, unbalanced?

A precis would be great.
Logged
Pages: [1]   Go Up
« previous next »