Home
Help
Search
eHam
>
eHam Forums
>
Amplifiers
>
10 KW CCS ON 6M...USING THE 3CX-6000A7... PART 21
« previous
next »
Pages: [
1
]
Go Down
Print
Author
Topic: 10 KW CCS ON 6M...USING THE 3CX-6000A7... PART 21 (Read 178 times)
VE7RF
Member
Posts: 1608
10 KW CCS ON 6M...USING THE 3CX-6000A7... PART 21
«
on:
March 16, 2023, 10:33:59 PM »
Here, the small 240 vac variac is installed..... complete with a right angle drive, that goes through the rear panel.
Small Variac is used for filament voltage adjustment. Pretty slick, unique arrangement.
https://www.youtube.com/watch?v=1BzsQrxLqYE
«
Last Edit: March 16, 2023, 10:43:53 PM by VE7RF
»
Logged
VR2AX
Member
Posts: 2233
Re: 10 KW CCS ON 6M...USING THE 3CX-6000A7... PART 21
«
Reply #1 on:
March 17, 2023, 01:11:49 PM »
This only works when everything is constant? Vac that is, sorry for the contradiction in terms, but I am sure that you get my drift
Logged
Print
Pages: [
1
]
Go Up
« previous
next »
eHam
>
eHam Forums
>
Amplifiers
>
10 KW CCS ON 6M...USING THE 3CX-6000A7... PART 21