Could some do a quick model of my newly installed Inverted L?
Curious how my 135-foot 160 Meter Inverted L will model. I had to bend the horizontal section back and loop the end through a 4-inch pulley. So, the horizontal section is now in the shape of a Vee. Vertical section up about 40 feet and the ends of the horizontal section up about 50 feet or so. Have around 20 16-foot buried radials with a counterpoise about 30 feet long.
VNA Results
After I learn how to use the software, I will do it here. Just anxious to see so I can finally put this project to bed.
73,
Bill KO4NR
Author
Topic: Inverted L Modeling (Read 142 times)