Pages: [1]   Go Down

Author Topic: HMN 300B Mic  (Read 5927 times)

4X4FD

  • Member
  • Posts: 5
HMN 300B Mic
« on: October 16, 2008, 11:59:22 AM »

I have HMN 3000B Mic and i would like to get the PinOut of it. I want to connect it to Maxtrac 300
Logged

KF4URY

  • Member
  • Posts: 101
HMN 300B Mic
« Reply #1 on: October 17, 2008, 11:08:23 PM »

Does yours have the microphone connector?


From.....
http://www.repeater-builder.com/maxtrac/maxtrac-index.html



    * HMN1038 Standard beige base station (desktop) microphone, with PL defeating "Monitor" button. The black version is the HMN3000 (see below). The cord is available as a repair kit, as 30-80043N04 or as HKN4291 "Microphone Cable Kit"

    * HMN3000B black base station (desktop) microphone. See notes above under HMN1038.

    * HMN3031B base station (desktop) microphone similar to HMN3000 but used on carrier squelch radios, does not have a PL defeat button



There is also a pinout listed as well as the pinout at batlabs.

http://www.batlabs.com/images/maxrad.gif

and the parent page at

http://www.batlabs.com/maxrad.html

Logged
Pages: [1]   Go Up