Pages: [1]   Go Down

Author Topic: Rig Design  (Read 6794 times)

WD4INX

  • Member
  • Posts: 1
Rig Design
« on: November 14, 2000, 03:35:46 PM »

Does anyone have a resource (books, webpage, etc.) for designing TX's or RX's?  There's a huge source of schematics on the web, but not much in the way of design that I have seen.  Got any ideas?

tnx
jim
Logged

WB6BYU

  • Member
  • Posts: 20896
    • Practical Antennas
Rig Design
« Reply #1 on: November 14, 2000, 06:06:16 PM »

"Solid State Design for the Radio Amateur" by Wes Hayward and
Doug DeMaw.  Available through the ARRL.

Also, try these web sites:
http://www.qrp.pops.net/
http://www.intio.or.jp/jf10zl/
http://www.qsl.net/g3pto/
http://www.alphalink.com.au/~parkerp/project.htm
http://noname.cmpe.ubc.ca/pierre/hbradios.htm

That should give you a start, and plenty of links to follow.

- Dale WB6BYU
Pages: [1]   Go Up