Pages: [1]   Go Down

Author Topic: Ten tec 1220  (Read 5470 times)

MM5DOG

  • Member
  • Posts: 1
Ten tec 1220
« on: January 02, 2001, 10:00:40 PM »

I'm currently building one of these little 2m  rigs and have just to add the pa stage and filters but on testing i note the deviation is pretty low...i have noted other folks comment on this....is there a recognised mod for this  as i couldnt find it?? .The rig has set up perfectly so far and the dev control is set to max as per instructions,on testing with the driver producing a few Mw rf and monitoring on 3 other rigs i note the deviation level appears to be pretty low.
Logged
Pages: [1]   Go Up