Home
Help
Search
eHam
>
eHam Forums
>
QRP
>
qrp dummy antenna
« previous
next »
Pages: [
1
]
Go Down
Print
Author
Topic: qrp dummy antenna (Read 6069 times)
N5JYW
Member
Posts: 5
qrp dummy antenna
«
on:
July 28, 2001, 10:05:58 AM »
I am building an SST transceiver. The instructions call for the use of a dummy antenna. I am interested in building sometthing simple, but effective, for this project only, The antenna connection is BNC. Any specifics? TNX--Bob
Logged
KA1DBE
Member
Posts: 122
qrp dummy antenna
«
Reply #1 on:
July 28, 2001, 03:33:06 PM »
I posted you in the homebrew section but to go further, take the two resistors and solder one lead to the center of a chassis mount BNC connector and solder the two remaining leads to the ground side. Makes for a very small and compact dummy antenna. 73's and good luck!
Logged
KA3UEH
Member
Posts: 1
qrp dummy antenna
«
Reply #2 on:
August 02, 2001, 07:49:45 AM »
If you use the MP-1 with the tripod, it makes for a good dummy antenna, too. (hi hi)
Logged
Print
Pages: [
1
]
Go Up
« previous
next »
eHam
>
eHam Forums
>
QRP
>
qrp dummy antenna