Topic: IC 735 remote control question (Read 11373 times)

AH2CG · « **on:** June 01, 2009, 09:32:29 AM »

I have an IC 735. I'm trying to set it up for remote control. I purchased a CI-V (serial DB-9 to mini pin) cable. I can't seem to get it to work. In order to test it I have tried to read the data coming out of the radio with just a basic terminal program. Can anyone tell me the baud rate, bit count and parity that it operates on?
Any help would be greatly appreciated!
Thanks
Jim
AH2CG
wolff@slowweb.net

AH2CG · « **Reply #1 on:** June 01, 2009, 06:18:22 PM »

UPDATE:
Got it to send commands to the radio but will no receive data.
So... I bought a radio shack scanner programming cable and that dosen't work (send or receive!)
Anyone got an idea?

W7NNN · « **Reply #2 on:** June 16, 2009, 11:36:16 AM »

Try this
http://www.ham.dmz.ro/icom/ic-735.php

73- Eric W7NNN

W7NNN · « **Reply #3 on:** June 16, 2009, 11:48:02 AM »

Does sound like its in your cable...I will check around my garage as I had one both for my 735, 751, and 736....They all worked fb on HRD...I'll let you know...Eric W7NNN

Author Topic: IC 735 remote control question (Read 11373 times)