Pages: [1]   Go Down

Author Topic: CW Filter Install Help...FT-77  (Read 3096 times)

K4EK

  • Member
  • Posts: 3
CW Filter Install Help...FT-77
« on: May 16, 2002, 10:39:00 PM »

Recently purchased a 500Hz CW filter for my FT-77.  Purchased the rig used, so I have no manual.  It's been a great performer here in the shack as a backup, but since I stay on the lower end of the bands, I really needed to be able to zero in on signals and get rid of some of the QRM.

I figured the filter installation was as simple as dropping in the 4-pole unit, four quick solder points, and I'd be done...but I tried that without success.

The rig still works as normal with a wide reception, but when I switch to the narrow filter, I get no change.

Am I overlooking something obvious?  If anyone's familiar with this rig and has any answers or suggestions, please let me know.  Thanks in advance!

73,
Doug, K4EK
Logged
Pages: [1]   Go Up