eHam

eHam Forums => Mods And Repairs => Topic started by: N9AMC on February 14, 2023, 09:07:40 AM

Title: Yaesu FT-101 B and E
Post by: N9AMC on February 14, 2023, 09:07:40 AM
I picked up two of these 101s, a B and an E. I seem to recall the radio needs a jumper between pins one and two on either the VFO connector of the ACC connector, but I'm not finding the answer. There is no jumper in place now.
Anyone know?
Thanks
N9AMC
Title: Re: Yaesu FT-101 B and E
Post by: KG7VQ on February 14, 2023, 11:18:47 AM
Both of the FT-101s I had, had a loctal plug in the back where the jumper was done.
Title: Re: Yaesu FT-101 B and E
Post by: KG7VQ on February 14, 2023, 11:23:52 AM
oh, and the loctal goes the the accessory socket (p) in my manual.
Title: Re: Yaesu FT-101 B and E
Post by: N9AMC on February 14, 2023, 02:09:46 PM
Thanks. Since I don't have the plug, I will  have to create a jumpter for pins one and two. Nothing is numbered, so I'm having to figure out which are those pins. So, i am narrowing it down. Thanks again for the reply