eHam

eHam Forums => Digital => Topic started by: VE7AY on January 17, 2017, 09:33:12 AM



Title: JT65
Post by: VE7AY on January 17, 2017, 09:33:12 AM
Hi,

I recently set up JT65 and logged about 25 contacts on 20m. Then I switched to 30m (macro frequency) and while I hear good signals nothing gets decoded?

Any help is welcome.

Thx
Jerry


Title: RE: JT65
Post by: ON5MF on January 17, 2017, 12:34:06 PM
Are you in the wrong sideband?

JT65 is usb on all bands.


Title: RE: JT65
Post by: VE7AY on January 17, 2017, 05:56:28 PM
Ya I'm aware of that thanks.

I'd try some other bands but 15, 20 and 30 are all I have right now and 15 is pretty dead.


Title: RE: JT65
Post by: K8AEC on January 18, 2017, 12:31:09 AM
Maybe your squelch setting changed?
That's the only thing I can think of.


Title: RE: JT65
Post by: ND6M on January 18, 2017, 05:51:00 AM
exactly what freq are you on?

perhaps what you are hearing is JT-9 (usually 2 Kc up) , not JT 65A.

depending on the software you are using, it may or may not decode both  simultaneously.

WSJT-X works for me


Title: RE: JT65
Post by: VE7AY on January 18, 2017, 09:50:22 AM
10.138


Title: RE: JT65
Post by: KJ3N on January 19, 2017, 07:35:06 AM
What NTP client are you usig to sync your clock?


Title: RE: JT65
Post by: VE7AY on January 19, 2017, 10:09:34 AM
S U C C E S S

I have no idea why but today it suddenly decoded a signal from Hawaii and I logged my first QSO on 30m.

Thx everyone for comments.