Call Search
     

New to Ham Radio?
My Profile

Community
Articles
Forums
News
Reviews
Friends Remembered
Strays
Survey Question

Operating
Contesting
DX Cluster Spots
Propagation

Resources
Calendar
Classifieds
Ham Exams
Ham Links
List Archives
News Articles
Product Reviews
QSL Managers

Site Info
eHam Help (FAQ)
Support the site
The eHam Team
Advertising Info
Vision Statement
About eHam.net

donate to eham
   Home   Help Search  
Pages: [1]   Go Down
  Print  
Author Topic: th79a programming software needed  (Read 3483 times)
KM4IY
Member

Posts: 33




Ignore
« on: November 22, 2014, 05:12:13 PM »

i have a need for the th79a programming software but i'm unable to find anything specifically designated for it.  do you have any ideas where i might locate what i need?

thank you
Logged
KB8YVC
Member

Posts: 14




Ignore
« Reply #1 on: December 05, 2014, 02:36:15 PM »

You are the programming software, unfortunately Angry.  That radio doesn't support programming via PC.  If you know somwonw who has one programmed, then you could do the over the air clone process.  See below:

If you have both radios please hold down the -0- key / PAG L Key when you switch on the radio. So you see the letters CLONE on the display.   Please push the ptt on the radio which is to be the master.  It takes a time to transmit all memory with maybe names, call sign etc.  After Clone is finished you see END written in Display. Best is to switch of both radios. After switching on again you will have two same radios.
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.11 | SMF © 2006-2009, Simple Machines LLC Valid XHTML 1.0! Valid CSS!