Call Search
     

New to Ham Radio?
My Profile

Community
Articles
Forums
News
Reviews
Friends Remembered
Strays
Survey Question

Operating
Contesting
DX Cluster Spots
Propagation

Resources
Calendar
Classifieds
Ham Exams
Ham Links
List Archives
News Articles
Product Reviews
QSL Managers

Site Info
eHam Help (FAQ)
Support the site
The eHam Team
Advertising Info
Vision Statement
About eHam.net

donate to eham
   Home   Help Search  
Pages: [1]   Go Down
  Print  
Author Topic: Question PTC IIe Pactor Icom IC 706 MK II G  (Read 3350 times)
DL1FUG
Member

Posts: 1




Ignore
« on: March 18, 2002, 02:21:27 AM »

hallo Hams,
I trie to connect a ICOM IC 706 MKII to a PTC IIe,
with the ACC plug I can receive, send but I can't get a connect. Perhaps I have a wrong pin???
Who has this installation running and can help me???
Many thanks
Udo DL1FUG
Logged
N1ZZZ
Member

Posts: 213




Ignore
« Reply #1 on: April 17, 2002, 01:13:59 PM »

I will assume you are using the included cable that came with the TNC:

Pin 2-White-GND
Pin 3-Yellow-HSEND
Pin 8-Blue-power (13.8V)
Pin 11-Violet (purple)-MOD
Pin 12-Green-AF

The blue wire allows the radio to supply the power to the TNC so you don't need to use a separate power cable.

This information is from Icom America and was sent along with my TNC when I bought it.

Gd luck

73
Jeremy N1ZZZ
Logged
K9FV
Member

Posts: 494




Ignore
« Reply #2 on: April 30, 2002, 05:11:13 PM »

Since you are sending and receiving, I expect you have the wiring connected OK.  

Are you trying on the airmail system or normal packet?  

Be sure you've checked and have all RF out of the system...  We need to know a good bit more than what you're telling about your system.

Ken H>
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.11 | SMF © 2006-2009, Simple Machines LLC Valid XHTML 1.0! Valid CSS!