- Amateur Radio (Ham Radio) Community

Call Search

New to Ham Radio?
My Profile

Friends Remembered
Survey Question

DX Cluster Spots

Ham Exams
Ham Links
List Archives
News Articles
Product Reviews
QSL Managers

Site Info
eHam Help (FAQ)
Support the site
The eHam Team
Advertising Info
Vision Statement

Reviews Categories | Ham radio kits | K6XX Zero Beat Indicator Kit by WB3AAL Help

Reviews Summary for K6XX Zero Beat Indicator Kit by WB3AAL
K6XX Zero Beat Indicator Kit by WB3AAL Reviews: 1 Average rating: 5.0/5 MSRP: $(missing—add MSRP)
Description: The purpose of this circuit is to light an LED in your radio when you tune to within +- 20hz of a cw signal. This makes it easy to zero beat a cw signal by eye rather than by ear.

There are four versions of this kit. Three are designed to be installed in Elecraft radios. The fourth is for other radios. It is up to the builder to work out the details for installing in other radios.

The K6XX CW Indicator Kit utilizes Surface Mount technology or SMT. It uses subminiature devices on a printed circuit board.
Product is not in production.
(Web site missing—add URL)
Email Subscription
You are not subscribed to this review.

My Subscriptions
Subscriptions Help

You can write your own review of the K6XX Zero Beat Indicator Kit by WB3AAL.

K4KRW Rating: 5/5 Dec 20, 2011 06:56 Send this review to a friend
Really handy zero beat tuning aid. Great kit  Time owned: 0 to 3 months
This circuit gives you a visual indication that you are tuned 'zero beat'. If the LED is flashing in time with the signal, you are there.

My FT-897D has this type of circuit built into it. I got a bit spoiled by it so I used this kit to add the feature to my Wilderness Radio Sierra. It samples the audio from the received signal. It was very easy to install and align and it works very well.

The PLL does cause the LED to flash randomly at times. But, I have not found this to be a big issue. If the LED flashes in time with the received signal, you are zero beat.

The quality of the board and components was very good. The instructions were also very good. The only extra items I needed were zip ties and heat shrink to tidy up the wiring and a mounting bezel for the LED. The yellow LED provided is very bright and works wonderfully. If you want something different, you can provide your own.

This is a surface mount kit. But the components are relatively large for surface mount components. So, it is a great kit to use to get experience with SMT. You will need a small tip on your iron and will need magnification.

Don't remove all of the capacitors from their marked packing at once unless you have a way to keep up with which is what. They are all unmarked (normal for surface mount). Two capacitors have the same value but one is temperature stable. You don't want to mix them up.

In summary, read the instructions carefully and make sure you understand them before assembling and installing. Once installed, you will find it works exactly as advertised.

This is really a handy device. I intend to add it to more of my radios.

If you have any questions, problems, or suggestions about Reviews, please email your Reviews Manager.