- Amateur Radio (Ham Radio) Community

Call Search

New to Ham Radio?
My Profile

Friends Remembered
Survey Question

DX Cluster Spots

Ham Exams
Ham Links
List Archives
News Articles
Product Reviews
QSL Managers

Site Info
eHam Help (FAQ)
Support the site
The eHam Team
Advertising Info
Vision Statement

Reviews Categories | Antennas: VHF/UHF+ Omnidirectional: verticals, mobile, etc | Jetstream JTD1 Discone Antenna Help

Reviews Summary for Jetstream JTD1 Discone Antenna
Jetstream JTD1 Discone Antenna Reviews: 2 Average rating: 4.5/5 MSRP: $43.95
Description: Wideband discone antenna (with no vertical radiator), 25-1300 MHz receive, 144,220,440,900,1290 MHz transmit (200W max. 32" high X 32" wide). Same as Workman T601 and available under following manufacturer names: Jetstream, Workman, Tram, Opek, Midland, Alan and others.
Product is in production.
More info:
Email Subscription
You are not subscribed to this review.

My Subscriptions
Subscriptions Help

You can write your own review of the Jetstream JTD1 Discone Antenna.

K0KS Rating: 4/5 Mar 3, 2019 20:39 Send this review to a friend
Versatile and Well Made  Time owned: more than 12 months
Mine is a Workman T601 and does not have a vertical element out the top. It has served well for my SDR-Play for VHF-UHF receiving but recently I tried using it for 2M FM and found the power folded back because of bad SWR. The SWR across the whole 2M band ranges from 2:1 to 3:1 and nothing seems to change it. The SWR is better for 222MHz and 440MHz but it's not good for the 2M band. Construction is better than more expensive discones that I've owned and it has survived the heat & humidity with no rust or corrosion. It does fail the advertised 2:1 maximum SWR however so only 4 stars.
N3HFS Rating: 5/5 Oct 29, 2015 20:48 Send this review to a friend
Good quality build and performance  Time owned: 0 to 3 months
I had terrific results from a rather expensive discone antenna I used nearly twenty years ago to great effect with 144, 220, and 440 MHz rigs. This wasn't my main VHF+ antenna, but it served as really nice secondary antenna for local (Baltimore) repeaters and for basic suburban/local simplex work. Additionally, I could use it for GMRS and for monitoring all sorts of frequncies on my scanner.

Fast-forward to last week when I took delivery of this Jetstream JTD1 antenna. It will serve pretty much the same duties here in Seattle as the discone antenna I had back then near Baltimore, mounted just below my Diamond CX-333 multi-collinear 2m-220-440 antenna up on my roof about 400' above the Puget Sound.

This antenna - which cost me a mere $34 at the K1CRA online store, is made with the same solid steel elements (8 rods for the "cone" and 8 more for the "disc") and a very nicely machined central core piece that received the threaded elements without any binding or complaint. Fortunately, I had a very small wrench (9/32") for tightening down the nuts, but a small adjustable wrench or even a pair of slip-lock pliers will do the job. For portable use, this antenna will easily break down into its included storage sleeve to take up very little space for storage or transportation - reassembly or disassembly should take well under 5 minutes. The SO-238 connector is fine (no threading or size problems), and I understand that an N-connector version is also available. The antenna at my QTH is mounted on schedule-40 PVC pipe, but be sure the outer diameter is at or under 1-3/8" because the antenna fits OVER (rather than being clamped to) the mast. Also, keep in mind that the feed line has to exit the mast somewhere - often a lot easier to accomplish with PVC fittings than with steel! Be sure to have a properly angled exit from the mast if you are using a stiff or otherwise limited-bending-radius feed line.

With good-quality LMR-400 feed line, I can work pretty much all of the metro area on this one alone, and have the flexibility of hooking up nearly any transceiver on or over 2 meters while getting great SWR results and very good signal out. Despite the reputation of having "zero gain," I have always found this antenna design to perform very well in urban and suburban environments. I really believe that this antenna design performs as well as any other dipole design, and the added "widebandedness" advantages simply complete the package!

To make my long story short, just allow me to say that this antenna seems to be of very nice quality and, based on my initial evaluation, I expect it to last me quite a long time - perhaps 10 years or even many more - up on my roof. For the price, this purchase was a STEAL! And it led me to making this my very first eHam review.

If you have any questions, problems, or suggestions about Reviews, please email your Reviews Manager.