- Amateur Radio (Ham Radio) Community

Call Search

New to Ham Radio?
My Profile

Friends Remembered
Survey Question

DX Cluster Spots

Ham Exams
Ham Links
List Archives
News Articles
Product Reviews
QSL Managers

Site Info
eHam Help (FAQ)
Support the site
The eHam Team
Advertising Info
Vision Statement

Reviews Categories | Interfaces, Radio to computer, amp, rotor, coax switch, internet | SharkRF OpenSPOT Help

Reviews Summary for SharkRF OpenSPOT
SharkRF OpenSPOT Reviews: 25 Average rating: 4.1/5 MSRP: $204.00
Description: The SharkRF openSpot is a digital radio IP gateway / hotspot which allows connectivity to D-Star, DMR, and C4FM digital voice networks. This device is completely standalone and requires no external PC hardware to operate.
Product is in production.
More info:
Email Subscription
You are not subscribed to this review.

My Subscriptions
Subscriptions Help

You can write your own review of the SharkRF OpenSPOT.

Page 1 of 3 —>

N4QWK Rating: 5/5 Jul 11, 2019 14:49 Send this review to a friend
Great Product  Time owned: more than 12 months
I have three of these. One for DMR, one for D-Star, and I just got another for Fusion. They all work great. It's basically set it and forget it, and it's also nice not to have the computer on to use them.
W4KVW Rating: 5/5 Mar 31, 2019 23:55 Send this review to a friend
Works AWESOME!  Time owned: 6 to 12 months
Works like a Champ.No issues with it for DMR.I does just what I purchased it for 1st time every time. Great product & I would purchase again if I needed another one.
KB4BJM Rating: 0/5 Mar 31, 2019 15:21 Send this review to a friend
P.U. stinks/headache  Time owned: 0 to 3 months
Found no local IP connection on Shark RF site. They do not support there obsolete products. The site is only friendly for their Openspot2. Spent way too much time to get it to work.
WA3HVR Rating: 5/5 May 14, 2018 18:09 Send this review to a friend
My own repeater!  Time owned: 0 to 3 months
I got one of these because our local repeater got hit by lightning and was off the air for about a month with no guarantee that it would get back on. Use it with an MD 390 and absolutely love it. Running .2 milliwatts, it covers my two-story house and property solidly. I really like this unit and can recommend it highly. I found it easy to set up and it works without any problems.
PA3HGT Rating: 2/5 Apr 9, 2018 21:23 Send this review to a friend
DMR not OK.Dstar great.  Time owned: 0 to 3 months
Had the Sharkrfspot for a very short time.Dstar excellent but DMR was distorted.Tried to solve it with changes in the TYTMD2017-programming but no success.Change firmware to the latest stable version:no succes.From my HT to the nearest repeater was OK,no distortion.After 2 weeks trying other suggestions, i sended back to the shop.Now i work with another hotspot,no problems.
K4FX Rating: 5/5 Apr 9, 2018 07:43 Send this review to a friend
Great  Time owned: 0 to 3 months
I have only had this about a week. I just now am getting into DMR. The openSPOT is a great solution for hams like me who do not live close to DMR repeaters. It took a bit to get it running by myself, but it works wonderfully. My advice would be to find someone with experience to save a lot of configuration work.
M0KZX Rating: 5/5 Mar 4, 2018 00:59 Send this review to a friend
Buy one!! One of the coolest digital radio gadgets out there  Time owned: 3 to 6 months
This is one of those things that you wonder how you ever lived without it.

Although I have my own Wires-X node, which requires having a radio and PC running to work, this tiny blue box does it all!

My only concern was that this would be a tricky thing to configure. I had nothing to worry about. Within no more than 5 minutes I had updated the firmware, programmed it with my user details and selected the room I wanted to use.

It's on 24/7 powered directly from my broadband router and it has never skipped a beat.

So easy to use across all digital networks and you can quickly switch between rooms and modes by logging in from a PC or mobile phone.

Clever stuff!!
VK5BM Rating: 2/5 Jan 24, 2018 16:32 Send this review to a friend
When it arrives faulty, check for dry joints if not functioning  Time owned: 0 to 3 months

Needs Help is relative to one unit, one works perfectly. I do question the support received.
We are commercially involved in the Electronics market and we would have sent a new unit to our customer immediately. This was not an option, and dozens of emails proved incorrect as it was SharkRF's hardware that was faulty. I bought two shark units, one setup perfectly,the other has a micro/dry joint issue that is faulty as these units are easy to set up as displayed with the first one. Both units have been locally bootloaded with the latest firmware and yes, the same result, one working perfectly and one is just a dud. To say I have problems getting a replacement is an understatement. I get much better communication from the people who supplied my Nanospot from the USA and communications re the DVmega, faultless. We are suspect of a dry joint in the manufacture process as there are several areas on the board of the faulty SharkRF that are just very noticeably thin in solder , having a workshop here, its going to be easier to just fix it ourselves as communications from the Openspot/SharkRF were just not helpful. I am probably one of the lucky ones as we have the resources to fix this unit ourselves but if you have not got the same resources, it can be a nightmare. Also having two units made it very easy to fault find the out of box warranty issue that was clear to us here in Australia. So lets talk about the unit that does work, transforming modes of transmission is the units strong point and when it works, it does this well. To be fair to the working unit, it has worked faultlessly and appears 100%. I just think if you are not overly technical, and need a simpler more reliable unit, the Nanospot or the DVMega has extremely good support and especially for Australia, DVMega is supported by Future Systems who are very pro active in the case of a problem versus the shark team that have not been the answer to any of our problems with the faulty unit. If you need to transform say C4FM to DMR, the shark can do this quite well but as announced recently, there are now other alternatives which I will be trying as they are arriving later this week fingers crossed. The world of digital is exciting, but I think I like the flexibility of the DVmega and the nanospot more and I have already contacted both companies and asked how they would treat an out of box warranty and far superior to the shark box we will fix ourselves. ******I decided to hold this review back and go out into the workshop and inspect the faulty SharkRF. Whoever is manufacturing this unit is needing to address their soldering process, unit now fixed, working all modes and cross modes, thanks to no helpful assistance from SharkRF unfortunately. Dry joint issue due to poor soldering, I have resoldered a few areas that were disastrous, maybe a batch problem, one would hope its not a long term problem as the care you need to take when fixing one of these boards that are extremely sensitive to static etc, not for the faint hearted. We have a lot of experience in this type of production so a fairly easy fix and both units cross moding and working as they should. If you get into trouble with hardware issues, drop us an email(see qrz) and we can go into detail in what to look for.
N0WTS Rating: 5/5 Sep 8, 2017 13:03 Send this review to a friend
Awesome  Time owned: 0 to 3 months
I have been using my OpenSpot know for about 3 weeks and love it. I only use it for DMR. I have a TYT MD2017 and use the OpenSpot two ways. The first way is, I plug it in my ethernet at home and turn on the radio. I have not experienced and dropped packets and it works quite well. The second way I use it is, I created a go box. This box has a GL-AR-150 WISP installed. It is plugged into the Hot spot via ethernet connections. I then connect the WISP controller to the hotspot on my phone. All items are plugged into a small battery pack and bam I have DMR wherever I go. Works great!! I have it on all of the time and only use about 1 gig of data a month. Great little item. It is really easy to set it up IF YOU follow the instructions on the SharkRF website.
N4JAP Rating: 5/5 Aug 11, 2017 14:30 Send this review to a friend
Simply awesome  Time owned: 3 to 6 months
SharkRF is amazingly simple to set up, especially for DStar. I use the DR function to engage and use reflectors from the radio. You do NOT have to key an "unlink" command to change reflectors, just key up with "Link to reflector ---" and it goes right to where you want to go. Along with control from the radio, you can also use the web portal or a smartphone to change reflectors. Remember, like with other access points you must wait until there is a break in a QSO transmission before you change reflectors.
I also use a DVAP, and the nice thing about the SharkRF is you don't need a computer or Raspberry Pi.. it is all self contained. Plus, there are no convoluted processes to make it work like on a Raspberry Pi, which I found needed to be constantly rebooted.
The Shark RF can also be left alone and powered up all the time, never gets hot and it just works reliably.
Page 1 of 3 —>

If you have any questions, problems, or suggestions about Reviews, please email your Reviews Manager.