- Amateur Radio (Ham Radio) Community

Call Search

New to Ham Radio?
My Profile

Friends Remembered
Survey Question

DX Cluster Spots

Ham Exams
Ham Links
List Archives
News Articles
Product Reviews
QSL Managers

Site Info
eHam Help (FAQ)
Support the site
The eHam Team
Advertising Info
Vision Statement

Reviews Categories | Antenna Tuners/Matching Networks | MFJ-971 Help

Reviews Summary for MFJ-971
MFJ-971 Reviews: 52 Average rating: 3.7/5 MSRP: $99.95
Description: 1.8 - 30 MHz 200 watt portable antenna tuner
Product is in production.
More info:
Email Subscription
You are not subscribed to this review.

My Subscriptions
Subscriptions Help

You can write your own review of the MFJ-971.

<— Page 3 of 6 —>

K1KUZ Rating: 4/5 Jun 22, 2010 17:49 Send this review to a friend
Nice Qrp tuner  Time owned: 3 to 6 months
After reading all the bad reviews, I must addmit I was sceptical on buying one of these! But I did anyway. it arrived well packed and in good shape, and I immediatly open up the case to look for all the bad solder joints and bent capacitors, but didnt find any of that! maybe I was one of the lucky ones! I did notice, however, the crappy sheet metal work on the front panel! whats up with that? It looked like they just stamped it out and put it on the front of the rig! So I removed it and did a thurough filing and deburring job to take care of that. there were no other issues! It will tune any type of antenna, at QRP POWER LEVELS! and works great for me. You cant really expect a tuner like this to handle no 150- 200 watts, even though they say it will. But at Qrp power there is no problem. I would have gave it a 5 if it were'nt for the front panel. Just give it a good looking over before you use it.
KC0ZZH Rating: 2/5 Nov 20, 2009 16:01 Send this review to a friend
Junk for anything higher than QRP!  Time owned: 3 to 6 months
I bought my 971 to replace an aging MFJ-941D. I wanted something to use here at the home QTH and out in the field.

I thought since the tuner it's self was small it would further enhance the portability of my new FT-857D. Unfortunately I never had the chance to take it out into the field before I started having problems with the tuner.

Right after putting it on the air into a resonant dipole I noticed from time to time it would arc on higher power. None of the tuners before ever did that and I could find nothing wrong with the feed-line/antenna system that would cause such issues. Opened up the unit to find that issue which some others on here found...bent plates. Spent quite a bit of time with the tuner and managed to get them straightened out. That solved the problems for a bit. About two weeks later it started arcing again and ended up burning through the inductance switch rendering the unit useless to me. I think MFJ's quality control needs to be improved and/or use better quality parts in the construction of their tuners.

I also don't like the fact that there is no coax bypass switch, although it's not a super big deal.

It did do an OK job at loading up on whatever I put it on, but once again I've had better results with other MFJ models.

In closing, I think this unit would be more than adequate for low power work but I can't give it good marks on higher power HF due to the failures that happened while I was operating.
KJ4NGS Rating: 2/5 Oct 27, 2009 10:01 Send this review to a friend
Open it up and inspect it first!  Time owned: 0 to 3 months
I have a small corner of a desk for all my equipment, so I was attracted to this unit for its size, cost, and ability to handle my transmitter's output (200w PEP SSB).

But as I started working with it, my nose told me I was frying something inside ...

Opening it up revealed the following issues with my unit:

(1) The "Antenna" variable capacitor was misaligned, and so it was shorting out in most positions. Much time was spent re-aligning the blades.

(2) The knob on the "Inductor" rotary switch was not set properly, and so when I thought I had a mid-range inductance selected it really was basically shorting the TX to ground.

As a result of (2), it started to smoke the inductor switch as it was shorting out the transmitter. (The rotary switch is not designed to handle much power, I suspect!) The schematic is clear that the "A" position was a short (why do they even do that?), but the H position I thought I was using was a fair amount of inductance.

I clipped the real "A" connection internally (I never want to accidentally short TX to ground, thank you very much), and re-aligned the knob, and now things seem to be working OK.

I guess I didn't let ALL the smoke out of it yet! ;-)

So if you're lucky, you'll get a unit where both variable caps aren't shorted and the knob is set right and all will work well for you. If you're not lucky, and don't correct the problems in it first, you can fry the unit. I imagine this explains the disparate reviews I see here in eHam.
N3NXD Rating: 1/5 Oct 2, 2009 18:51 Send this review to a friend
Poor Quality Control  Time owned: more than 12 months
Bought mine new April 2008. Used to tune up Icom 718 Transceiver. 100 watts.Noticed at times a fluttering of the cross match needles during TX. Finally It totally quit After warranty ran out, by 2 days.
Took case apart. Blown, cheapy made plastic band switch. Replaced with ceramic one from junk-box. Visual of inductor coil connections showed close coil winding to coil winding distance, and poor soldering. resoldered, and bent coils apart for more distance. Checked variable capacitor. Some plates barely brushing against rotor frame. Noticed charred material between some ( the fluttering needles) arcing. respaced plates. Took pipe cleaner and alcohol, removed considerable dust from between plates. Now works like a champ. No arcing.
OLLIEOXEN27 Rating: 1/5 Jul 20, 2009 08:27 Send this review to a friend
SWR roller coaster  Time owned: more than 12 months
A lot of these 971s are made with pop rivets instead of tapping screws. Thus the SWR is unstable - all you basically have to do is bump or move the tuner and the SWR will show it. Another problem with MFJ tuners is faulty SO-239s whose center pins are improperly mounted in the casings. Buy at your own risk. Don't say no one ever warned you.
K5III Rating: 5/5 Sep 27, 2008 20:30 Send this review to a friend
Great little tuner  Time owned: more than 12 months
I've owned my tuner for over 7 years now. I picked it up on eBay almost new in the box. I agree that MFJ has some challenges in the design on some things, however, this was one that was done right. It has performed flawlessly. The power reading is as accurate as you could get with a cross needle analog meter. If for some reason it is off slightly, it can be easily tweaked. It is light, easy to take with you, will tune a random wire with no problem. If you have problems using this tuner, then you would have problems with any manual tuner. It easy to use and great for QRP. I've used mine from 5 to 100w, and it worked every time. I am well please in the performance and price. The only negative is no bypass switch, but I haven't really missed it.
N2UGB Rating: 4/5 Jul 5, 2008 10:53 Send this review to a friend
Very nice QRP! Tuner  Time owned: more than 12 months
Set up with my FT-817ND and OHR-500. So, it is used as advertised...a QRP antenna tuner. Matches all the compromise antennas I am forced to use, including my Buddistick.

I have found the QRP power indication to be reasonably accurate. My OHR QRP wattmeter and the MFJ are pretty close, though the OHR is used when great precision required.

A a QRP op, I prefer having one less coax "patch" which is the case when using the 971.

I give it a 4, not because of performance, which is FB, but because of the small display that can be difficult to read for the tri-focal crown...of which I am a member.

I wouldn't bang it around.

A bypass switch would have been helpful, but I knew it wasn't there when I bought it, so I can't fault MFJ for that.

I like it and use it exclusively. On my operating position right now.

I have two of 'em.
IW1DFU Rating: 3/5 Jun 29, 2007 03:41 Send this review to a friend
so and so...  Time owned: more than 12 months
I've had one for more than one year and here you'll find some comments about it:
1) probably it's really good for QRP operation but if you try to use with something like 100W you'll sure have some problem: I've burned the inductance switch in few minutes... replaced with something better, it has worked fine but with some spikes on the capacitor (sometimes...)because they has really poor spaced.

2) it hasn't got the bypass switch... And you'll need it!

73 de Fabio, IW1DFU.
OE3SGU Rating: 4/5 Jun 28, 2007 09:15 Send this review to a friend
Good portable tuner  Time owned: 0 to 3 months
Recently bought one and it works just fine. Tried it with power levels up to 100 W and there are no problems with it. It fits nicely to my MFJ-9020 QRP rig. The only downside is that there is no bypass-switch.
W5VK Rating: 4/5 Mar 26, 2007 01:08 Send this review to a friend
Acceptable  Time owned: more than 12 months
I wanted a small flexible tuner for my IC 706G "jump bag" and the 971 meets my needs. I bought this new at Dayton and I've used it for 6 years without problems. MFJ tuners do have their share of QC problems but I found (after "frying" a few) that if you tune them at low power and then apply power, they will usually operate within specifications.
<— Page 3 of 6 —>

If you have any questions, problems, or suggestions about Reviews, please email your Reviews Manager.