- Amateur Radio (Ham Radio) Community

Call Search

New to Ham Radio?
My Profile

Friends Remembered
Survey Question

DX Cluster Spots

Ham Exams
Ham Links
List Archives
News Articles
Product Reviews
QSL Managers

Site Info
eHam Help (FAQ)
Support the site
The eHam Team
Advertising Info
Vision Statement

Reviews Categories | Direction Finding equipment | K0OV Offset Attenuator Help

Reviews Summary for K0OV Offset Attenuator
K0OV Offset Attenuator Reviews: 3 Average rating: 5.0/5 MSRP: $Varies with parts cost and case
Description: This offset attenuator can be used with any VHF transceiver or scanner radio that has a removable antenna. The receiver must have sufficient frequency coverage to permit tuning it 4 MHz away from the hunt frequency.
Product is in production.
More info:
Email Subscription
You are not subscribed to this review.

My Subscriptions
Subscriptions Help

You can write your own review of the K0OV Offset Attenuator.

W6DPS Rating: 5/5 Jul 14, 2013 23:55 Send this review to a friend
Great attenuator  Time owned: 3 to 6 months
I bought the 2MHz assembled version, so I just had to put it in an Altoids tin and mount it on a PVC fitting to use with my homebrew antenna.

Works very well on 2M, 222, and 440.

I got the 2MHz version because the old HT I normally use has a great S-meter and receiver, but only receives in the 2M band. So I just set to 144.565 and have had no issues.
KF7GD Rating: 5/5 Nov 10, 2005 17:45 Send this review to a friend
Nice kit  Time owned: 3 to 6 months
I built Marvin's version of the kit. Great kit works great, one of the best offset attenuators. I have built 4 all work fine.

WM5R Rating: 5/5 Feb 10, 2003 12:12 Send this review to a friend
Fun project!  Time owned: more than 12 months
I've built two of these offset attenuators. The only difficult part to find is the 4MHz oscillator. Luckily, I have a Fry's in town that happens to sell them. I was able to build the offset attenuator into a small electrical junction box designed for 1/2" PVC pipe that I then attached to the end of a WB2HOL tape measure yagi. Getting it and a 9V battery to fit inside required some intricate parts placement planning, but the result was a really small attenuator that works great! No messing with slide switches, just one big knob I can tune across a continuous range with my thumb.

I see that Marvin Johnston KE6HTS now offers a semi-kit with PC board, parts, and connectors. If I were to build another one, that would be the way to go.

If you have any questions, problems, or suggestions about Reviews, please email your Reviews Manager.