- Amateur Radio (Ham Radio) Community

Call Search

New to Ham Radio?
My Profile

Friends Remembered
Survey Question

DX Cluster Spots

Ham Exams
Ham Links
List Archives
News Articles
Product Reviews
QSL Managers

Site Info
eHam Help (FAQ)
Support the site
The eHam Team
Advertising Info
Vision Statement

Reviews Categories | Antenna Switching, Phasing, Controllers | Alpha Delta - 2 Antenna Switch Help

Reviews Summary for Alpha Delta - 2 Antenna Switch
Alpha Delta - 2 Antenna Switch Reviews: 16 Average rating: 3.9/5 MSRP: $49.95
Description: Two position with grounding antenna switch.
Product is in production.
More info: http://
Email Subscription
You are not subscribed to this review.

My Subscriptions
Subscriptions Help

You can write your own review of the Alpha Delta - 2 Antenna Switch.

Page 1 of 2 —>

K5DSQ Rating: 5/5 Dec 22, 2017 09:41 Send this review to a friend
Great Switch  Time owned: more than 12 months
I purchased the two antenna switch probably five years ago, switch it between antennas and ground every day and have never had any issues. Great product!
N0AH Rating: 5/5 Jun 27, 2017 07:19 Send this review to a friend
Well built, offers lighting protection at great value  Time owned: 0 to 3 months
I have my two backyard ground verticals lightning protected with ground rods next to the antennas, tied into the base of each antenna, and buried bare copper wire going to a common ground rod shared by all of my equipment under my utility box. That said, I needed to also protect my feedlines and found the Alpha Delta 2B switch to be an easy solution. They actually have drilled a hole for a ground lug bare of paint. The nicest thing is I can just switch the feedlines to ground when I leave the shack so I don't have to disconnect. The switch is surge protected......- Nothing will protect against a direct strike but nearby strikes, ambient built up static, are really minimized risk using this switch- I found it sturdy, well built, and without fault- I would suggest this to any one as part of a great way to tie in two antennas to a single radio feed etc... I paid $64.95 atHRO in Denver for it-
WA0VY Rating: 3/5 Jun 1, 2015 11:54 Send this review to a friend
My Review, take 2  Time owned: 0 to 3 months
This replaces a review I posted a few days ago. First, as mentioned, I like the idea behind this product: center unused antenna connector is grounded and both antennas are grounded when the switch is set to COM. Whether this is effective lightening protection or not, it would make me sleep better in a storm. So, a good idea. I noted that one of the N type connectors was flexing and found that the barrel had slightly separated from the base. At the same time, an amplifier was indicating arcing and SWR faults. I opened the switch intending to replace the suspect connector with a high quality Amphenol connector. Once inside, I did not like what I saw. The COM center pin connector strip terminates to a metal T which connects to the 1 and 2 center pin connector strips by a switch which uses a roller to push the 1 or 2 strip up to connect with the thin edge of the T. The T would rotate slightly as it was engaged and did not align well with the 1 or 2 strip. It would touch at an angle, not square. For a switch rated at legal limit, it seemed flimsy. I also noted some pitting on the No. 1 antenna center pin strip which looked like evidence of arcing. Since the amp had never faulted before, I concluded the switch was my problem and replaced it with a different switch rated a 3Kw.

The reason for this amended review is that I now have reason to believe that some or maybe even all of the faults I observed were phantoms. After installing the new switch I saw some odd instrumentation issues with the main amp. While it was not faulting like it had, it was still indicating transient SWR spikes, most at precisely 5.35:1, over and over. It also occasionally indicated a short blast of 1Kw RF power out while in standby and no drive. I swapped coax lines, switch positions, ran it direct and tried to confirm with other instruments. At the end of all that, I saw no evidence of any actual problem other than the instrumentation on the amp. While my observations about the AD are otherwise the same, I doubt that the switch caused the faults. Without the faults, I would rate the switch a 3. If your not running QRO and/or dont get faults, the nice lightning protection features make this switch a reasonable option.
W0BKR Rating: 5/5 Apr 9, 2015 17:45 Send this review to a friend
Top Line Switches  Time owned: more than 12 months
Never had an issue or problem with either my 2 position of 4 position switch....smooth movement changing positions, and very well issues here...
KG4FMQ Rating: 5/5 Oct 11, 2014 16:47 Send this review to a friend
GREAT!!!  Time owned: more than 12 months
I have had this model and the 4 position model for a couple of years now. I have had no problems switching, no problems on receive. Everything feels solid with the construction of the switching. I have NOT had to replace the plug yet, and I really have nothing negative to say! The bottom line is that it works as it should and is a great product!

W6LAX Rating: 1/5 Feb 15, 2014 14:05 Send this review to a friend
Relocated to Trash Bin  Time owned: 6 to 12 months
I don't like writing a negative review, but I've been through two of these switches in the past ten months. In both cases the SWR inexplicably started jumping all over the place as I transmitted. The first unit was replaced by Alpha Delta with the suggestion that I may have over-tightened the coax to it (I don't think I did). Now the replacement unit has failed as well and so has been relocated to the trash bin.
W0CZE Rating: 2/5 Feb 14, 2014 14:50 Send this review to a friend
CENTER CONTACT ON ONE CONTACT NOT SOLDERED!  Time owned: more than 12 months
VK2HLG Rating: 4/5 Oct 13, 2012 15:51 Send this review to a friend
Good -- but not all-weather  Time owned: 6 to 12 months
I made the assumption that I could put this device at the bottom of my two antennas, and that it was all right for exposure to the weather. It's not. Mine collected water, causing SWR spikes and eventual rusting of part of the switch. I will be able to clean and repair it, but be aware that this is not for unprotected outdoor installation.

Alpha-Delta does not say that it IS suitable for use that way, but they don't explicitly say that it ISN'T. So, my fault, but their documentation could be more clear about this.
KE4SWC Rating: 5/5 Sep 13, 2012 20:08 Send this review to a friend
Consistent AD quality  Time owned: 6 to 12 months
Bought off's swap meet board. I use it to switch an off-center fed dipole between an Icom 746pro and a Drake R8.

The arc plug blew during a storm - I didn't have my gear unhooked!! Everything was unharmed.

I love the solid clunk when switching positions. Another well made AD product.
K9BAG Rating: 4/5 Apr 9, 2009 12:27 Send this review to a friend
Well Made A-B Sw  Time owned: 0 to 3 months
I wanted to switch the xcvr between Ant and dummy load. Got one used off eBay. I removed the back cover to inspect the works. Well made with silver strips and contact wiper. Interesting how actuating the switch with cam-like roller arm raising the contact and makes the change. I'm happy.
Page 1 of 2 —>

If you have any questions, problems, or suggestions about Reviews, please email your Reviews Manager.