- Amateur Radio (Ham Radio) Community

Call Search

New to Ham Radio?
My Profile

Friends Remembered
Survey Question

DX Cluster Spots

Ham Exams
Ham Links
List Archives
News Articles
Product Reviews
QSL Managers

Site Info
eHam Help (FAQ)
Support the site
The eHam Team
Advertising Info
Vision Statement

Reviews Categories | Feedlines (coax, ladder-line, etc.) | Belden RG-8X Help

Reviews Summary for Belden RG-8X
Belden RG-8X Reviews: 7 Average rating: 4.4/5 MSRP: $.39/ft HRO
Description: Belden RG-8X "mini 8" 50 ohm coaxial cable is .242" diameter with a black jacket, foam dielectric, and a 16 AWG bare copper core.
Product is in production.
More info:
Email Subscription
You are not subscribed to this review.

My Subscriptions
Subscriptions Help

You can write your own review of the Belden RG-8X.

K4IQT Rating: 5/5 Feb 13, 2010 06:01 Send this review to a friend
Easy to install  Time owned: 6 to 12 months
RG-8X is easier to pull through conduit and route through a basement or attic than RG-8, and outperforms good old RG-58 by a wide margin. My trusty MFJ-259 assures me that it is not very good for VHF use, but I have external antennas only for HF, and in my house I needed to make some bends that are below the recommended minimum bend radius of RG-8 but perfectly acceptable with "mini-8". So it earns a 5 in my book!
K8OCN Rating: 5/5 Feb 12, 2010 18:54 Send this review to a friend
Good for what its designed for  Time owned: more than 12 months
Its not designed for long runs on VHF & UHF

It works great on wire antennas for HF and is lighter than the thicker stuff.

Check the loss charts and then you can make a good decision depending on your operating frequency, length, and how much money you have to spend.

I tried using this for VHF and when I changed to 9913 it was like getting a antenna twice as high.

For VHF spend some money and get good stuff!
K1FPV Rating: 5/5 Feb 12, 2010 18:16 Send this review to a friend
Decent at LF & low to medium power.  Time owned: more than 12 months
RG-8X isn't intended for use at VHF or UHF except for relatively short patch cords. At 80 and 160 meters though, the loss is low and it will handle the legal power limit with a decent SWR.

To out and out call it no good when being used for the wrong application is a grave injustice. It is like coming upon a large building totally engulfed in fire and trying to use a small chemical fire extinguisher to put it out. Of course, it does nothing to help! So do you say the fire extinguisher is no good? Well, that apparently is what a lot of folks on here do.

Know what you are talking about before condemning something!
W3TEZ Rating: 1/5 Feb 12, 2010 15:10 Send this review to a friend
not great  Time owned: 0 to 3 months
this stuff is ideal for mobile antennas. i lately have been using vhf/uhf and this wire is one of the worst for base station application. if you really want to get out good, i reccomend lmr-400 or higher.
KF8RX Rating: 5/5 Feb 8, 2006 11:45 Send this review to a friend
Go Figure???  Time owned: more than 12 months
I have two runs of about 125 feet of RG8X that is partly buried. It's been out there in the Florida soil and sunshine for years. I run 1500 watts from my Commander 2500 daily on the low bands. I have never had a problem. One goes to a 75 meter dipole bypassing the tuner and the other goes to a Carolina Windom through a Palstar 1500CV.

I know this shouldn't work well at all. However sometimes you got to say to hell with science!

K9KJM Rating: 5/5 Apr 1, 2005 00:00 Send this review to a friend
Great for HF  Time owned: more than 12 months
Belden RG-8X is very nice coax for HF use. I agree that Belden has a better coax than most "off-brand" suppliers........ Over the years Belden has proven to be one of the best coax and other wire suppliers out there.
(With the exception of the early versions of the junk 9913 coax) (Use LMR-400 for VHF/UHF low loss applications)
The RG-8X is even OK for very short jumpers for test etc purposes for VHF/UHF, But dont attempt to use it in any length more than 20 feet or so for VHF/UHF!
N3PKC Rating: 5/5 Mar 31, 2005 21:58 Send this review to a friend
Blows away other 8x brands  Time owned: more than 12 months
@ .39/ft HRO, it's hands down the best 8x for the money. Cut some open, take a look, then do the same with some or other cheap 8x and see. Don't forget the UG-176 adapters.

If you have any questions, problems, or suggestions about Reviews, please email your Reviews Manager.