- Amateur Radio (Ham Radio) Community

Call Search

New to Ham Radio?
My Profile

Friends Remembered
Survey Question

DX Cluster Spots

Ham Exams
Ham Links
List Archives
News Articles
Product Reviews
QSL Managers

Site Info
eHam Help (FAQ)
Support the site
The eHam Team
Advertising Info
Vision Statement

Reviews Categories | Antennas: HF Mobile & Accessories | High Sierra "Bullseye" Screwdriver Turns Counter Help

Reviews Summary for High Sierra "Bullseye" Screwdriver Turns Counter
Reviews: 1 Average rating: 4.0/5 MSRP: $110
Description: Screwdriver positioning system (4.5"x2.5") with backlit LCD display. It counts impulses from a switch/magnet combo added to the Black Hawk motor assembly that lets you reference antenna resonance at any frequency by counting coil turns, and showing a number on the LCD display. It's not a's an additional device that will work with High Sierra's standard controller or EZ-Tune controllers for Yaesu, Icom, and Kenwood tranceivers.
Product is in production.
More info:
Email Subscription
You are not subscribed to this review.

My Subscriptions
Subscriptions Help

You can write your own review of the High Sierra "Bullseye" Screwdriver Turns Counter.

K7JQ Rating: 4/5 Jul 15, 2005 07:44 Send this review to a friend
Not perfect, but suits my needs  Time owned: 0 to 3 months
I use this device with a High Sierra HS-1800/PRO 10-80 meter screwdriver in a fixed location. It's supposed to attach a number to a known resonant frequency so that when you move the antenna to another frequency and come back to the original, resonance will still be at that referenced number without having to re-check SWR, or listening for highest noise-floor level (or seeing it on a spectrum scope). Well, it works....sort of. It's not can be off 10-15 numbers from the original marking. However, it fills my general needs. Having the screwdriver in the back yard, I can't see its movement from the shack to approximate the position of the coil, or even see if it's moving at all. It's especially useful when going from 40 to 80 meters (a span from the #180's to the #530's on the display). Then I can begin fine-tuning for lowest SWR at a specified frequency...cuts down on guessing the time of coil travel, or watching for the top or bottom end-of-travel light to illuminate. I give it a "4" due its lack of pinpoint accuracy...not a "Bullseye", but OK for my requirements. If anyone has experience with any of the other screwdriver counters on the market (Tarheel, Ameritron, etc.) in regards to their accuracy, I would appreciate an e-mail. 73, Bob,K7JQ.

If you have any questions, problems, or suggestions about Reviews, please email your Reviews Manager.