- Amateur Radio (Ham Radio) Community

Call Search

New to Ham Radio?
My Profile

Friends Remembered
Survey Question

DX Cluster Spots

Ham Exams
Ham Links
List Archives
News Articles
Product Reviews
QSL Managers

Site Info
eHam Help (FAQ)
Support the site
The eHam Team
Advertising Info
Vision Statement

Reviews Categories | Antennas: VHF/UHF+ Omnidirectional: verticals, mobile, etc | Cushcraft A430-11s Help

Reviews Summary for Cushcraft A430-11s
Cushcraft A430-11s Reviews: 2 Average rating: 3.0/5 MSRP: $100
Description: 430 to 435 mhz 11 element beam
Product is in production.
More info: http://
Email Subscription
You are not subscribed to this review.

My Subscriptions
Subscriptions Help

You can write your own review of the Cushcraft A430-11s.

N4DBM Rating: 4/5 May 7, 2010 05:15 Send this review to a friend
Pretty Good  Time owned: more than 12 months
Had mine for nearly 20 years. The design hasn't changed much. I don't particularly like the SO-239 connector, I prefer, like many hams, a type-N for 440 MHz and beyond. Construction is a little on the cheaper side, you can tell the aluminum is kind of brittle and mostly made of pot metal. However, I give this a 4 in spite of the mechanical stuff because it does have good forward gain compared to test antennas, a pretty clean pattern and good match. I use mine for vertical polorization on an RF link. Like the other gentleman said about the quality, I did have a few bolts that didn't even have slots cut in them! And, it would be nice to see stainless bolts and hardware for a change. Overall, I'd recommend this antenna to a friend if you could buy it second-hand at a cheaper price.
WD8PTB Rating: 2/5 May 31, 2006 06:38 Send this review to a friend
many small problems  Time owned: 0 to 3 months
The screws for the elements were to short. You could not start the nut and lock washer, you had to snug down the nut to compress the mast and then remove the nut and add the lock washer. The directions say to keep the matching rod parellel to the element. The pl259 bracket and the slider are different distances from the element so I'm not sure how I was supossed to do this. The directions say that any lenth of coax can be used. This is true but the SWR changes. SWR at 433.6 was good no matter what but I wanted to operate at 432.1. The band width had several peaks aand dips between 430 and 435. I was able to tune for 432.1 but when I changed coax lenth it changed.
I could not get them on the phone . Their answering machine say's they respond to Email in one day and phone calls in 3 days. I left a Email message last week including my Email and phone number and have not yet received a responce

I have built other antennas with no problem and have home brewed several vhf/uhf antennas so while I do not consider myself an Expert I am not a Novice antenna builder either. Don WD8PTB

If you have any questions, problems, or suggestions about Reviews, please email your Reviews Manager.