- Amateur Radio (Ham Radio) Community

Call Search

New to Ham Radio?
My Profile

Friends Remembered
Survey Question

DX Cluster Spots

Ham Exams
Ham Links
List Archives
News Articles
Product Reviews
QSL Managers

Site Info
eHam Help (FAQ)
Support the site
The eHam Team
Advertising Info
Vision Statement

Reviews Categories | Antennas: HF Mobile & Accessories | High Sierra - Sierra Slim Mono Band HF antennas Help

Reviews Summary for High Sierra - Sierra Slim Mono Band HF antennas
High Sierra - Sierra Slim Mono Band HF antennas Reviews: 3 Average rating: 5.0/5 MSRP: $$21.00
Description: Sierra Slims are made from a 4 foot long 3/8 inch fiberglass rod. There is an adjustable .100 diameter stainless steel whip that is about 48 inches long. The ferrule that holds the whip has to set screws so you can adjust for the lowest SWR and lock the whip into place. Sierra Slims have the standard 3/8-24 threaded bottom. sierra slims can handle a maximum of 200 watts PEP.
Product is in production.
More info:
Email Subscription
You are not subscribed to this review.

My Subscriptions
Subscriptions Help

You can write your own review of the High Sierra - Sierra Slim Mono Band HF antennas.

K2RHK Rating: 5/5 Nov 3, 2012 18:22 Send this review to a friend
Excellent replacement for Lakeview Hamstick  Time owned: 0 to 3 months
After Lakeview Hamsticks became unavailable I searched for a replacement and came upon the High Sierra Sierra Slim monobanders. In every way -- construction, ease of use, and especially performance they surpass the traditional Hamsticks. I've recently done an informal A/B comparison between the 20 meter models and found the Sierra Slim superior to the Lakeview Hamstick. I'll be repeating the comparison with all the 40M to 10M versions (except for 17M which is currently out of stock) soon and will post the results. Meanwhile, on the air results using my Yaesu FT-857D and a trunk lid mount have been outstanding.
KE5OQV Rating: 5/5 May 21, 2009 20:09 Send this review to a friend
Excellent results  Time owned: 0 to 3 months
Just finished evaluation of two Sierra Slim 20m antennas configured using the High Sierra dipole union. The dipole beam was mounted on a mast at an elevation of 30 feet.

A Collins KWM-2A transceiver was used to test the antenna. The microphone used was a Collins SM-2. SWR/power measurements were made using a Dishtronics 2104A Watt meter.

The antennas and dipole union are extremely well made. Setup was simple with a minimum of ajustments needed to achieve a SWR of 1.4-1.5 at 14.250 MHz. Band width was approximately 100 KHz (for SWR <=2). Power output averaged 105 to 110 watts at 14.250MHz.

Contacts were made with XE1B, TI2ERS, HC2AQ, N8ZBA, KG4IAL and VE6AO. Signal reports ranged from 5x6 to 5x9+10db.

K6CN Rating: 5/5 Feb 27, 2009 17:14 Send this review to a friend
Great Stealth, Portable & Field Day System  Time owned: 0 to 3 months
Using two (2) 40M HIGH SIERRA SLIM'S connected back-to-back with the High Sierra dipole bracket and mounted only six feet (6') above the ground on a High Sierra tripod & mast, I worked the following stations using my Ten-Tec Argonaut with just 20 watts of output power:

-KH7B Laupahoehoe, HI
-CT9L Madeira Island
-P40R Aruba
-JA8RWU Chitose, Hokkaido, Japan
-Py5CA Curitiba, Brazil
-EF8M Canary Islands
-Pj2T Cuaracao, Netherlands Antilles
-D4C Cape Verde Islands

These contacts took place during the CW DX Contest and were worked on 20 February 2009. These antennas are well made and certainly do the job. My thanks to the folks at High Sierra Antennas for allowing me to have so much fun.

If you have any questions, problems, or suggestions about Reviews, please email your Reviews Manager.