- Amateur Radio (Ham Radio) Community

Call Search

New to Ham Radio?
My Profile

Friends Remembered
Survey Question

DX Cluster Spots

Ham Exams
Ham Links
List Archives
News Articles
Product Reviews
QSL Managers

Site Info
eHam Help (FAQ)
Support the site
The eHam Team
Advertising Info
Vision Statement

Reviews Categories | Batteries & Chargers for amateur radios. | La Crosse BC-9009 AlphaPower Battery Charger Help

Reviews Summary for La Crosse BC-9009 AlphaPower Battery Charger
La Crosse BC-9009 AlphaPower Battery Charger Reviews: 1 Average rating: 4.0/5 MSRP: $45
Description: o Battery charger for NiCd and NiMH AA and AAA rechargeable batteries
o New overheat detection protects against overcharging;
o Individual LCD displays for each charging compartment
o 4 operating modes--Charge, Discharge, Refresh, and Test
o Includes 4 AA and 4 AAA rechargeable batteries, 4 C- and 4 D-size battery adapters, and a travel bag
o Measures 5 by 3 by 1-1/2 inches; 1-year limited warranty
Product is in production.
More info:
Email Subscription
You are not subscribed to this review.

My Subscriptions
Subscriptions Help

You can write your own review of the La Crosse BC-9009 AlphaPower Battery Charger.

KE9ZM Rating: 4/5 Aug 14, 2011 07:53 Send this review to a friend
With 4 digital readouts a buy at the $45 price point  Time owned: 0 to 3 months
This charger is a good value at a price point of $45. Consider also that you get 4 AA 2600 mA batteries, 4 AA 1000 mA batteries, and the C and D cell carriers as part of the deal. If you have a device that needs C or D cells now you have another option – use AA’s in those devices with the AA carriers supplied in this package.

The biggest plus is the 4 independent digital readouts – one per cell – and all the information it will tell you about your batteries. I used to use a multimeter to check battery voltage; now the charger does this for me. I never had the capability to determine “as tested” battery capacity. The La Crosse Technology BC-9009 AlphaPower Battery Charger can determine this though a discharge/recharge cycle. Given this new capability my drawer of older AA and AAA cells are destined for a health check. Plus, “as tested” capacity lets you match cells to eliminate that pesky “reverse charged” phenomenon that you can get with cells in packs of 4 or more when one cell is much weaker than the rest of the cells in the pack.

Some chargers get confused if you put in a cell that is below a threshold voltage or is reverse charged (reverse charged due to a weak cell in a pack of stronger cell – an un-matched set). I did not have a reverse charged battery to test to see if the BC-9009 could handle this situation. In the past, to deal with this situation, I used a “dumb charger” for a few minutes to get the reverse charged battery corrected and charged with a minimal capacity. Then I put it in the smart charger to take it up to its full capacity. So, being able to match cell capacity in some applications is important if you run a pack of cells all the way down to the point the device will not function. The BC-9009 can help you match cell capacity when using packs.

Being able to choose the charge rate is a big plus. This gets a little complex in that the maximum capability of the power supply for this charger is about 4 amps. So the total amount of charge current can not exceed 4 amps. Therefore, charge only 2 cells at 1800 mA or 4 cells at 1000 mA. The default is a charge rate of 200 mA – a nice leisurely charge. If you’re in a hurry then 4 cells charging at 1,000 mA takes about 2.5 hours. Or, two cells at 1800 ma in a little over 1 hr.

No major problems with this charger so far. My only nit is the manual which is hard to read in its tiny tiny font.

At $45 from with free shipping the La Crosse Technology BC-9009 AlphaPower Battery Charger is a “buy”.

You can read my full review here -

If you have any questions, problems, or suggestions about Reviews, please email your Reviews Manager.