Manager


Manager - NA4M
Manager Notes

Reviews For: PreciseRF 2-Tone Generator

Category: Tools & Test Equipment for the amateur radio work bench

eMail Subscription

Registered users are allowed to subscribe to specific review topics and receive eMail notifications when new reviews are posted.
Review Summary For : PreciseRF 2-Tone Generator
Reviews: 1MSRP: 239.50
Description:
The TTG1 delivers standard 2-tone 700Hz and 1900 Hz audio signals for testing radio transmitters and RF amplifiers, and adjusting modulation settings. The TTG1 operates on a 9V battery (included). The line level out (150mV – 3V) may be connected directly to the microphone connector of most transceivers. The 700/1900Hz TTG1 frequencies result in 3rd order products of 3100 Hz and 5th order products of 4300 Hz. Transmitter linearity may be determined by examining the 2-tone modulated transceiver RF output on an oscilloscope, station monitor or spectrum analyzer. The TTG1 comes fully assembled in a blue-baked enamel premium shielded die cast aluminum alloy housing. The complete specifications are as follow:

Two tone frequencies: 700Hz 1900Hz
Wave shape: Sine wave
THD distortion: Less than 1%
IM Distortion: -30db or less
Output level (line): Adjustable 150 mV – 3V P-P
Output impedance (line): 47K
Output Level (speaker): Adjustable 100mW – 2 Watt
Output impedance (speaker): 8ohms
Amplitude balance range: +/- 20dB
Frequency adjustment range: +/- 50Hz 700Hz +/- 75Hz 1900Hz
Frequency stability: Drift less than 1% after 30 minutes warm up
Power requirements: 10mA 9 volt DC Duracell MN1604 6LR61 or equivalent
Physical: 1 lbs 4 x 3 x 1.2 in
Application: Transceiver and Amplifier IMD and distortion testing
Product is in production
More Info: http://www.preciseRF.com
# last 180 days Avg. Rating last 180 days Total reviews Avg. overall rating
0015
AD5X Rating: 2013-04-21
Nice Instrument Time Owned: 3 to 6 months.
If you want to make 2-tone tests, this unit is one to consider. Very well built and easy to use. I did find the output level too hot to apply directly to the microphone input of my transceiver, so I built an external attenuator that also provided PTT (see the Product Modifications section of my website at www.ad5x.com).